This topic is now archived and is closed to further replies.

G25/G27 Hub Template

2 posts in this topic

Hey everyone. I put together a hub template to attach a full size steering wheels to the G25 & G27. I used the measurements I found online. Using Adobe Illustrator, here's what I came up with. I just ordered the G27 so I haven't tested this out, but if the measurements I found online are correct, this should be on the money. The outer diameter is 83mm, which translates to a half millimeter shy of 3.25". You can get a small slice (1/2" or 5/8" thick is all you need) of 6061 aluminum online for about $5. Tape or glue this template onto the block, center punch the holes you need and then drill/tap them as needed. This should be a pretty easy DIY for those with access to the right tools. Hope it helps you out.


Logitech G25/G27 Steering Wheel Hub Template

Share this post

Link to post
Share on other sites