Thrustmaster T300RS usb internal connections
5 5

3 posts in this topic

I've been having connection issues with my pedals. Nothing shows up. I've check the pedals (got another set to test which worked 100%)  thought maybe it was the pedals that were not working. Checked all connections. 

I decided to open the wheel and see if anything was loose inside. 

Upon opening up the wheel I found this issue. 

There was a wire (thicker black one) that comes from the usb connection internally. It's not connected to anything. I believe this may be the issue. There are 4 wires on the usb into a clip plug red, green, white and another black with a thinner covering. The thicker black one was not connected to anything. 
 
I've attached pictures. 
 
Please advise to where this black wire should be connected. It has a solder tin so it must connect somewhere.
 
Thanks. 

20210410_173323.jpg

20210410_174137.jpg

20210410_173135.jpg

20210410_173121.jpg

20210410_173114.jpg

20210410_173259.jpg

Share this post


Link to post
Share on other sites

This is a super late reply, but if anybody else has this problem and is looking for a solution:

There's a white connector that connects all the cables coming from USB to the PCB. The wire posted by OP probably has slipped out of this connector.
 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
5 5