Archived

This topic is now archived and is closed to further replies.

Can't figure out "H" shifter setup

3 posts in this topic

Hey guys, I have a G25, how do I setup GT5 to use the "H" shifter patten? In the G25 control screen it only shows an arrow up and down on the picture of the shifter.

Thanks,

God Bless

Share this post


Link to post
Share on other sites

As far as I can recall all I did was start using the h shifter like I wanted to... Make sure you press the clutch and then try just selecting some gears with the shifter and it should all work fine. If you're having problems not being able to select a gear properly when driving, that may just be the way GT5 is...

You've got to be really precise when changing gear and it will only allow you to change gear up if you're fully off the gas and the clutch is depressed, and only let you change down if the clutch is fully depressed (you can blip the throttle at the same time)... it takes a while to get used to but should work fine when you're used to it.

Also if you flick into sequential mode on the shifter it will realise that you don't need to use the clutch so you can just shift without using the clutch at all...

If you're still having issues then gimme a shout :D

Mez

Share this post


Link to post
Share on other sites