clvnng 84 Report post Posted May 21 (edited) I have a bunch of left over 8020 Aluminum extrusions parts from an R&D project. All parts are CNC laser cut. There are different finishes available, all perform exactly the same. Each Plate is $10 USD Each + $20 USD Flat Rate Shipping (Per Package to US / Canada) Monitor Angle Adjuster 2 Available - 16GA Stainless Steel with plastic protector 4 Available - 1/4in Aluminum sand blasted 4 Available - 1/4in Aluminum no finish Vesa Monitor Mounts (75x75mm pattern) 3 Available - 16GA Aluminum no finish 2 Available - 1/4in Aluminum sand blasted 1 Available - 16GA Aluminum sand blasted Buttkicker Mini LFE Mounting Plates 12 Available - 16 Gauge Stainless Steel with plastic protector Edited June 10 by clvnng Share this post Link to post Share on other sites
ericshun 0 Report post Posted May 29 How do the Buttkicker Mini LFE Mounting Plates work? Do you have pictures of them mounted to the plate? Share this post Link to post Share on other sites
slingshot666 26 Report post Posted May 30 Do You have any of the plates that I outlined in your picture? Share this post Link to post Share on other sites
Ruttman98 2 Report post Posted May 30 12 hours ago, slingshot666 said: Do You have any of the plates that I outlined in your picture? I am wondering the same. Thank you. Share this post Link to post Share on other sites
clvnng 84 Report post Posted June 1 On 5/29/2020 at 1:15 PM, ericshun said: How do the Buttkicker Mini LFE Mounting Plates work? Do you have pictures of them mounted to the plate? The buttkicker mounts on the 3 holes in the triangle position. holes are mounted to the 8020 as well. Share this post Link to post Share on other sites
clvnng 84 Report post Posted June 1 On 5/30/2020 at 9:30 AM, Ruttman98 said: I am wondering the same. Thank you. i can custom fabricate them for you. how many do you need? $25 usd each + shipping. here are images of my complete rig. let me know if you are interested in anything else. https://imgur.com/a/5Hbk12V Share this post Link to post Share on other sites
spiderspinx 0 Report post Posted June 2 Do you happen to do 100x100 Vesa mounts? And what would the cost be? Share this post Link to post Share on other sites
clvnng 84 Report post Posted June 2 6 hours ago, spiderspinx said: Do you happen to do 100x100 Vesa mounts? And what would the cost be? I have 2 on the right that can handle x100 vesa. $10 each for these because they were part of an R&D batch. if you need any additional ones it'll cost $15 usd + shipping. I need to go back to the laser vendor. Share this post Link to post Share on other sites
spiderspinx 0 Report post Posted June 2 4 hours ago, clvnng said: I have 2 on the right that can handle x100 vesa. $10 each for these because they were part of an R&D batch. if you need any additional ones it'll cost $15 usd + shipping. I need to go back to the laser vendor. Will be PMing Share this post Link to post Share on other sites
MrDoug 0 Report post Posted June 9 Is any of this still available? I'm frustrated that every decent chassis is backordered, so building my own out of 8020. Looking for some specialty parts that aren't available from the off-the-shelf extrusion distributors. Share this post Link to post Share on other sites
clvnng 84 Report post Posted June 11 On 6/9/2020 at 3:33 AM, MrDoug said: Is any of this still available? I'm frustrated that every decent chassis is backordered, so building my own out of 8020. Looking for some specialty parts that aren't available from the off-the-shelf extrusion distributors. yup all of these parts are available. I can help you build a complete rig as well. https://imgur.com/a/5Hbk12V Share this post Link to post Share on other sites
