DiY Button Plate for Flat Dish Rims Carbon Finish
2 2

4 posts in this topic

 

1.jpg.de1c4a6e05cd16200722e5863da715f2.jpg 2.jpg.03022b97cb93e166ead0d25f391e0fa9.jpg4.jpg.f233878de29299a79f12daf7c0dc99a2.jpg    P1000418.JPG.26c4c37c1dfe95eb5b8c61bb5d03a1d7.JPG  3.thumb.jpg.35047f8a617fa95f3fa5327f5ca13eba.jpg

This is a simple 3D Printed wheel button plate for your DIY project, fits steering wheels with 70mm PCD center hole pattern.

For flat dish rims between 320 to 350mm.
The kit included's a support for magnetic paddle shifters from my store or others.
The button plate has a compartment for a usb joystick PCB not included and is 20mm deep 26mm with the shifter support,holes for buttons are 12/13mm.
 
Steering wheel, buttons and USB joystick controller are not included

Share this post


Link to post
Share on other sites
13 hours ago, axelair said:

 

1.jpg.de1c4a6e05cd16200722e5863da715f2.jpg 2.jpg.03022b97cb93e166ead0d25f391e0fa9.jpg4.jpg.f233878de29299a79f12daf7c0dc99a2.jpg    P1000418.JPG.26c4c37c1dfe95eb5b8c61bb5d03a1d7.JPG  3.thumb.jpg.35047f8a617fa95f3fa5327f5ca13eba.jpg

This is a simple 3D Printed wheel button plate for your DIY project, fits steering wheels with 70mm PCD center hole pattern.

For flat dish rims between 320 to 350mm.
The kit included's a support for magnetic paddle shifters from my store or others.
The button plate has a compartment for a usb joystick PCB not included and is 20mm deep 26mm with the shifter support,holes for buttons are 12/13mm.
 
Steering wheel, buttons and USB joystick controller are not included

Looks great!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
2 2