SteveS 1390 Report post Posted June 30 (edited) About New F1 sim rig plans available. My original plans I posted many years ago have been very popular, so it was about time to create a much improved version with more flexibility and strong enough for the new trend of DD wheels. Goals Easy to build from 1 sheet of 3/4" MDF & some construction lumber Full adjustment for wheel, seat & pedals Low cost to build using common materials from local DIY store Built in adjustment for your racing comfort Wheel height adjustment Wheel angle adjustment Wheel back/fourth adjustment Pedal height adjustment Pedal back/fourth adjustment Pedal angle adjustment Seat height adjustment Seat angle Adjustment Seat flexibility Conventional race seat Ikea Poang chair Race wheel support Our new OSR F1 seat provides lots flexibility for mounting a wide variety on wheels including direct wheels like OSW & Fanatec Podium, Accuforce, Fanatec, Logitech and Thrustmaster. Pedal support Fanatec, Thustmaster, HE, Logitech Construction The design is simple to build with no complex joints and very cost effective solution for Sim Racers who enjoy DIY. One sheet of 5/8" (16mm) or 3/4" (19mm) MDF or furniture grade plywood 16 feet 1 3/4" * 3" construction lumber Sorry, I have run out of storage space on ISRTV site, so cannot upload picture directly, Click on link below to see images OSR Sim Rig Plans Edited June 30 by SteveS Share this post Link to post Share on other sites
SteveS 1390 Report post Posted June 30 (edited) https://i.imgur.com/sT3fUN0.jpg https://imgur.com/jMqYOff https://imgur.com/5W35D8t https://imgur.com/gO90Eo7 https://imgur.com/yXvWcse https://imgur.com/UogLmHq Edited June 30 by SteveS Share this post Link to post Share on other sites
