Full Motion Custom Build Everything included!
1 1

23 posts in this topic

Up for sale:

My custom made rig, everything is designed and made by me and i decided to put it up for sale since i rarely use it.
The actuators are made with teknic clearpath SERVO motors. Instead of stepper motor these are virtually silent much like frex Hyperaxis.
The servo drives a lead ballscrew and has a CUI sensor on the axle with a 12bit resolution (4096steps)
This results in +300mm/s under load. SCN5 underload is maybe 40mm/s. Each actuator should be capable of 700lbs weight this is however not tested.
Max Travel distance is 175mm.
Speeds are dialed down to about 25% at the moment this is way fast already.
However these have a much larger travel distance and are quicker aswell. Controller is custom made with Atmel Microchip, i takes 1 usb port and will be configured as a std COM port. This works great with Simtools. 

Pedals are also custom made much like heusinkveld pedals. all 3 have load sensors. These connect to a also custom made Atmel Microchip board which connect with usb and will be seen as a std USB game controller interface.

Small MIGE comes with sparco steering wheel and granite device controller.

Sparco Seat is the medium.. forgot the model number i can look it up.

Comes with custom made sequential shifter and 3d printed pedal shifter behind the sparco. These all connect to the same board as the pedals. So all just takes 1 usb port. Comes with button box aswell.

Who ever is interested in this should be fairly handy and be willing to take on a project, since it is all custom made you will have no manufacturer support as you would have maybe with other products. However i will help with whatever you need. Ill provided schematics and source code for all the hardware and software.
Also all FUSION360 files can be included.

This motion rig can also probably made work with the AMC1280USB module.

This is located in South Florida 34986. No shipping. But im willing to drive a reasonable distance  for the right buyer.

Actuators and Seat are sold  open for reasonable offers.

Summary:

80/20 Rig
Sparco Seat
4xActuators
1xActuator controller usb interface + Powersupply

1xSmall Mige
1xGranite Device controller + PowerSupply
1x Throttle, Brake, Clutch Pedals + Usb interface
1x Sequatial Shifter
1x Sparco Wheel with custom made quick release
3x Quick release modules for other wheels
1x Button Box on side of rig

More pictures and info available on request.
Martin

 

 

 

 

 

 

 

 

 

 

 

IMG_2428.jpg

Edited by martinfl
pics adjustment

Share this post


Link to post
Share on other sites

This looks better than i expected, looks like what you would expect a good quality motion rig to look like. Would love to see a video of it in motion. Glws

Share this post


Link to post
Share on other sites
12 hours ago, Mayaman said:

This is fantastic work.  Are you a machinist?

Thank you! no just a passionate hobbyist  :D 

9 hours ago, Bogdan said:

This looks better than i expected, looks like what you would expect a good quality motion rig to look like. Would love to see a video of it in motion. Glws

Thanks! Ill see if i can get a video one of these days.

9 hours ago, MGK said:

Whomever buys this is getting a really good deal!

Thanks, I hope i can make someone happy with it :D 

Share this post


Link to post
Share on other sites

Well done, this is fantastic :) I'd seriously consider this if you weren't at pretty much the farthest you could be from me within North America haha. 

I'd love to pick your brain on those actuators sometime.. did you have a build thread on xsimulator or something?

Share this post


Link to post
Share on other sites
On 6/25/2019 at 11:50 PM, unxetas said:

Well done, this is fantastic :) I'd seriously consider this if you weren't at pretty much the farthest you could be from me within North America haha. 

I'd love to pick your brain on those actuators sometime.. did you have a build thread on xsimulator or something?

Thanks, no build threads sorry. Shoot me a pm with your questions.

Share this post


Link to post
Share on other sites
9 hours ago, abss said:

that s interesting work you ve done . simtools see these actuator as Snc5 from mirai ?

In simtools you select serial interface and put in the right parameters.

Thanks

Share this post


Link to post
Share on other sites
1 hour ago, SimRacer60 said:

Hi Martin. Beautiful build. If I didn't have so much money in my rig I'd jump on it. You should consider listing it on the iRacing hardware forum. It would get a lot of attention.

Thanks will do!

Share this post


Link to post
Share on other sites

I would like to see the motion cockpit in action with a good audio, please ...

(I see only pictures here, the rest not working)

Share this post


Link to post
Share on other sites

Thank God it sold!

I don't think I could prevent myself from buying this any longer.  It truly is a one of a kind work of art.  I'm sure the buyer will be extremely happy with their purchanse.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
1 1