DSD Button Box/Panels vinyl decals
8 8

104 posts in this topic

V3
$16
Downtown Los Angeles

V3
UPDATED JAN 25th -
16$ USD -

120 individually cut decals for buttons boxes and steering wheels. Made From vinyl in either matte or sem-gloss. Can be easily cleaned with a damp cloth/sponge. Full Description found below with links to purchase.

16 units left
SEMI GLOSS option - https://www.etsy.com/listing/544188607

SOLD OUT
MATTE option - https://www.etsy.com/listing/530386492

 

NathanW

 

 

 

v2.1.jpg

Version_03_full.jpg

Version_03_Higher.jpg

Edited by ndw1138

Share this post


Link to post
Share on other sites

Funny enough I traded in my triples a year ago now. I'm on a vive, and still I made and these for myself to start. Silly I know, but helps me as I jump from car to car remember where everything is.. but agree it's mostly silly on my part :)

 

 

Labels_01.jpg

Edited by ndw1138
typo

Share this post


Link to post
Share on other sites
10 hours ago, ndw1138 said:

Funny enough I traded in my triples a year ago now. I'm on a vive, and still I made and these for myself to start. Silly I know, but helps me as I jump from car to car remember where everything is.. but agree it's mostly silly on my part :)

 

 

Labels_01.jpg

Ok. You sold me. And I sent the link to a buddy and you probably sold him too.

Share this post


Link to post
Share on other sites

A lot of them but not all, as they've changed their layout on the same models over time (best I can tell).

The issue for compatability is how far the rotary dials are from each other. You need at least 2cm of distance from the 13mm nut holding the rotary knob in place. 

NathanW

Share this post


Link to post
Share on other sites
10 hours ago, ndw1138 said:

A lot of them but not all, as they've changed their layout on the same models over time (best I can tell).

The issue for compatability is how far the rotary dials are from each other. You need at least 2cm of distance from the 13mm nut holding the rotary knob in place. 

NathanW

hi Nathan, i have the DSD P1 http://www.derekspearedesigns.com/p1p2.html and DSD TrackBoss http://www.derekspearedesigns.com/dsd-track-boss.html

would love to get these great sheets, but want to make sure it will fit/ or is compatible with my DSD button boxes.

Share this post


Link to post
Share on other sites

They are all pre cut and individual except for 4 push button strips. Even the 4 strips are evenly spaced if you wanted to cut them up. Regardless, I completely sold out my entire run of 78 Saturday evening - sorry. 

Nathan

IMG_9469.JPG

IMG_9478.JPG

Share this post


Link to post
Share on other sites
On 7/23/2017 at 7:23 PM, rocafella1978 said:

hi Nathan, i have the DSD P1 http://www.derekspearedesigns.com/p1p2.html and DSD TrackBoss http://www.derekspearedesigns.com/dsd-track-boss.html

would love to get these great sheets, but want to make sure it will fit/ or is compatible with my DSD button boxes.

 You'd have to measure that distance from the big LED button and the rotary knobs with a ruler to know for sure. Sorry their cut out for that P1 does not have the hole pattern so I cannot be positive - needs 2cm of distance

 

n

Share this post


Link to post
Share on other sites
29 minutes ago, Sim Racing Jason said:

Gutted i have only just come across this topic far to late as o would of bitten your hand off for a set mate.

Please if you ever make any more let us know.

Thanks.

Jason.

same here, could have used a set, let us know if you produce another run...really cool stuff!

Share this post


Link to post
Share on other sites
7 hours ago, aldo said:

same here, could have used a set, let us know if you produce another run...really cool stuff!

 

4 hours ago, DjFIL said:

Any chance for a second print?  These really do look like top quality.  Would want to put these on my OSW button box when I get it ordered later this year.

 That was technically my 2nd printing. My first run was only about 40 just to make sure I could do it and keep it within my tolerances (to my utter surprised those sold out in a night). I think if I can find time to do a 3rd run I will probably alter it a bit and add a few more options that are currently not there. (FOV, tires, fuel, launch control).

NathanW 

Edited by ndw1138

Share this post


Link to post
Share on other sites
3 hours ago, Jasonike said:

Could you do a custom run for a button box?  I would like an oval stock car version

 If I go forward with a new set, just curious what do you need in oval racing that isn't there? I don't have the time to do custom run, that would literally take me a couple hours and thus be cost prohibitive. Sorry, but may be I can see about including something if I can get to a new set.

 

NathanW

Share this post


Link to post
Share on other sites
On 7/26/2017 at 10:24 AM, DjFIL said:

Any chance for a second print?  These really do look like top quality.  Would want to put these on my OSW button box when I get it ordered later this year.

A new set will release this weekend if your still interested.

 Several new decals added, a couple requested icons added, several of the old made better/clearer, 1 fix, new rotary on button decals added, and a new big (LED) push button decal. 

Nathan

Labels1_v02.jpg

Share this post


Link to post
Share on other sites

I would like to order two sets of these.

Please let me know when available!

Can't order through the links say sold which I assume means out of stock

Edited by FRAG 133

Share this post


Link to post
Share on other sites
On 8/5/2017 at 7:17 AM, Jasonike said:

How do I order a set?

 

On 8/4/2017 at 11:00 PM, DjFIL said:

Sweet. I'll totally order a set. Just let us know where. :)

 

On 8/4/2017 at 3:12 PM, Sim Racing Jason said:

Mate please count me in for a set as well.

money and address waiting.

Jason.

 

 

17 hours ago, FRAG 133 said:

I would like to order two sets of these.

Please let me know when available!

Can't order through the links say sold which I assume means out of stock

 

 

https://www.etsy.com/listing/544188607/button-box-steering-wheel-decals-dsd-osw?ref=listing-shop-header-0

 

They are back online! Version 2 -

 

(Several requested decals added, 2 fixes, better borders, 7 new push button decals, 6 new rotary decals, 6 new labels decals)

89 Decals for Button Boxes/Console/Dashes. 
Semi gloss vinyl that is precut for easy application. 
Easy to apply, easy to clean. 
For both street cars and race cars.

23 Round Graphic Buttons
Mirrors
Camera
Headlights
Brights/Flash
Wipers
Launch Control
Traction Control
Porsche Stabilty Managment
ABS
Horn
MGU Mode
MGU Delivery
PSI -
PSI +
DRS
KERS
Start
Brake Bias -
Brake Bias +
Tires
Limiter
Pit
Fuel

15 Push Button Labels
Splits
VR Center
Tires
Pit
Mirrors
ABS
TCS
Radio
Flash
Wiper
MGU-k Delivery
MGU Recovery
MGU-K Mode
Fuel
Lights

8 Flip Switch Labels Side
Tire Info
Headlights
Rev Limiter
Ignition
Splits/Delta
AUX
MAIN
Standings

6 Flip Switch Labels Lower
Damage
Limiter
Headlights
Display
Auxiliary
MAIN

4 Strip spaced for push buttons
Postion Status
Driver Request
Damage Request
Heads Up Display

On Dial Rotary Code
14 colors strips

18 Rotary Labels 
AUX %
AUX #
Brake Bias #
Engine Map #
Field of View +/-
Boost % (2X one for screw head end position)
MGU-K Control (2X one for screw head end position)
Tires (Dry, Inter, Wet)
Traction Control #
ABS +/-
Volume %
Radio Volume #
Throttle Sensitivity #
AC Map #
MENU #
Fuel Mix #
 

 

NathanW

 

 

pushButton.jpg

rotary_2.jpg

rotary_colors.jpg

full_corrected.thumb.jpg.80dd454a866aea64e5ca1d37a8cbbd40.jpg

 

Edited by ndw1138

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
8 8