Hayder989 0 Report post Posted July 31, 2016 Hello guys, I have changed my steering wheel recently now I don't have any buttons on my wheel. Is there any way to make a DIY button using the wheel's two button connectors? Share this post Link to post Share on other sites
Tex-Rec 0 Report post Posted September 15, 2018 Yes this is really easly posible. Firt you need a plate that holds your new buttons , note the stock connectors give you posibility only to have 6 buttons / 3 Left and 3 Right. When you have the plate and the buttons connected , its easy to wire them , Red colored cable is the one that connected to the other 3 to give contact for wich buttons should be active.. So when you wire , connect Red cabled from the connector to all 3 buttons on the left to one connecter from each button , and do the same with the red cable to the right side , then simply use the another 3 cables from each connector , and connect them to the another connector on the button and your done. Share this post Link to post Share on other sites
Mestizo69 35 Report post Posted November 26, 2018 Here are some mods I have done to my G27 Share this post Link to post Share on other sites
Mestizo69 35 Report post Posted November 26, 2018 https://www.isrtv.com/forums/topic/24577-evolution-sim-rig/ Share this post Link to post Share on other sites
