abss 21 Report post Posted April 13, 2016 Hello can someone tell what kind of pots (model number) to buy to replace the pots in a G27 shifter . help is appreciated . thanks Share this post Link to post Share on other sites
Aus_James 0 Report post Posted April 13, 2016 Is it a potentiometer? I have an issue with my G25 shifter. In 1st gear, it can sometimes find neutral and if I move it to the right, it goes into 3rd gear. Same in 2nd, finding neutral and move to the right finds 4th. Is this a known issue? Worn out pot? Share this post Link to post Share on other sites
abss 21 Report post Posted April 13, 2016 8 hours ago, Aus_James said: Is it a potentiometer? I have an issue with my G25 shifter. In 1st gear, it can sometimes find neutral and if I move it to the right, it goes into 3rd gear. Same in 2nd, finding neutral and move to the right finds 4th. Is this a known issue? Worn out pot? likely check this : opem slowly and take you time and clean then pots with isopropanol and /or WD40 https://www.ifixit.com/Guide/Logitech+G27+Shifter+Potentiometer+Replacement/42378 but i still need the part numbers if someone can help... Share this post Link to post Share on other sites
Aus_James 0 Report post Posted April 13, 2016 Thanks for that but it turned out to be even easier. On the shifter shaft inside the housing, there are two hex screw/bolts that screw into the shaft. These lock the shaft into place in either 1st/2nd gear or 5th/6th/reverse gears. One was loose. Simply tightened up and now the shifter has no slop in those gears and holds gears great. Share this post Link to post Share on other sites
