Archived

This topic is now archived and is closed to further replies.

SOLVED: CSR Wheel won't turn 900 degrees anymore?

1 post in this topic

I'm pretty sure it used to go the full 900 degrees, but now it will only do about 300 (150 to either direction) degrees. I am using Firmware 757 and Driver 226. I have tried setting 900 degrees both in the wheel and in the drivers (wheel set to sensitivity: OFF). I can slide to less than 900, and I see a change, but it's just proportionally less, not accurate. The drivers do show the rotation, and list it by number as correct from the setting, i.e. if I have it set to 900, it shows 450 left and 450 right, or for 600 it shows 300 left and 300 right. But it's not actually that amount of rotation. 

Any idea what's going on here?

I'm on Windows 10, 64-bit. The product exactly is: Forza Motorsport CSR Wheel USA, CSR Elite Pedals, CSR Shift Set. I have the Pedals plugged into the wheel, and "Combined pedals" checked in the drivers.

EDIT/SOLUTION: D'oh! I somehow managed to download the 757 firmware, but for the non-Elite version 756 is what I needed. I re-flashed and now it's working correctly.

Share this post


Link to post
Share on other sites