chzsteak 0 Report post Posted January 20, 2011 Hey guys. Its been a while! We've been hard at work and have finally shipped a couple of these out! Below I have provided some new pics and information describing the Tachbox K1.0. -Martin Kompas Technologies USA[email protected] Complete TachBox K1.0 $389.00 US TachBox Chassis Leo Bodnar's SLI-Pro Complete w/ wires (4) Button Switches (2) Rotary Switches (1) Coiled USB Cable (1) 6' USB Cable (1) 1/4” Spacer (6) #8 Steel 1-3/4” Self Tapping Screw (6) #8 Steel 2” Self Tapping Screw (1) Install Guide/Instruction Manual Software provided by EKSimracing.com and can be download from http://www.eksimracing.com SLIMax Manager II software cost $7 for a personal license. Software updates are available from EKsimracing.com. Be sure to register your device at EKsimracing.com! Unit Fully wired and ready to go! TachBox K1.0 Chassis $180.00 US Drilled to Fit the Logitech G25/G27 *Custom Drilling Also Available Flat-rate shipping in USA is 15.00 2-4 Week Delivery *International Shipping Available Payment made through PayPal Check out this review from a customer from Luxembourg. http://www.homecinema-fr.com/forum/viewtopic.php?p=174612177#p174612177 Thanks everyone diagram by chzsteakguy, on FlickrIMG_0863 by chzsteakguy, on FlickrIMG_0857 by chzsteakguy, on FlickrIMG_0855 by chzsteakguy, on FlickrIMG_0853 by chzsteakguy, on FlickrIMG_0851 by chzsteakguy, on FlickrIMG_0849 by chzsteakguy, on FlickrIMG_0847 by chzsteakguy, on FlickrIMG_0833 by chzsteakguy, on FlickrIMG_0831 by chzsteakguy, on Flickr Our website will be up and running soon... For inquiries, please drop us a line at kompastechnologies.com Video http://www.youtube.com/watch?v=SjRzVRL8yvs Pics Share this post Link to post Share on other sites
Tinker 15 Report post Posted January 20, 2011 Looks real nice. Is it possible to have the mounting holes for both a G25 and G27 on the same plate. Also can the 6 bolt 70mm spacing mounting holes be added to support other wheels like MOMO, SPARCO and OMP that use the common 70mm spacing 6 bolt pattern on the plate. BTW what is the plate made of? Is CF film already applied ? What is the cost for just the plate with no electronics ? Share this post Link to post Share on other sites
jr1414 3 Report post Posted January 20, 2011 Looks very nice. I assume that there is a backplate on the unit, and it's just shown open here to show routing of wires, etc. I'd be interested, but I'd also need to know where you found that coiled mini USB to USB female cord, that's pretty nice and a necessity for this application. Share this post Link to post Share on other sites
Tinker 15 Report post Posted January 20, 2011 Looks very nice. I assume that there is a backplate on the unit, and it's just shown open here to show routing of wires, etc. I'd be interested, but I'd also need to know where you found that coiled mini USB to USB female cord, that's pretty nice and a necessity for this application. Do search on e-bay for a coiled USB cable that will work with Garmin GPS units. I bought four of them. The ones I got were mini male USB (SLI-pro side) to male USB (PC side). I just use and USB extender cable to reach the PC. Share this post Link to post Share on other sites
ProjektONE 0 Report post Posted April 3, 2011 I'm interested if these are still available. Email sent. Share this post Link to post Share on other sites
jr1414 3 Report post Posted April 4, 2011 I highly recommend one of these. I have one on my wheel now, and the build quality is excellent! Martin and Robert are wonderful to deal with, true gentlemen, and they made my whole experience a pleasure. The newer CF is much better, it looks the goods. BTW, is that my tachbox in the photos? Share this post Link to post Share on other sites
chzsteak 0 Report post Posted April 4, 2011 Very happy to hear you like what we've done! The ultimate compliment, thank you James! Share this post Link to post Share on other sites
Darin Gangi 1,074 Report post Posted April 4, 2011 We'd love to check out one for review. Email me direct if you'd like to have it on the show. . Share this post Link to post Share on other sites
Brett 0 Report post Posted August 18, 2011 Hey guys I'm really interested in one of these for my G27... not having a lot of experiences with these electronics how hard are they to put together (including the SLI-pro modules) I'd like to find something that's complete (minus the wheel hehe). Any ideas would be appreciated Share this post Link to post Share on other sites
Maki30 0 Report post Posted August 11, 2013 Nice and Neat. I like it! How can I order? im in Manila Philippines! -Maki Share this post Link to post Share on other sites
TheJoker 0 Report post Posted August 11, 2013 All this awesome work and you use a g27... Share this post Link to post Share on other sites
Gunstar 615 Report post Posted August 12, 2013 All this awesome work and you use a g27... First of all, old post, it was from 2 years ago. Second of all, why not a G27? There are probably more G27's out there than the CSW and T500 combined... and doubled! Share this post Link to post Share on other sites
TheJoker 0 Report post Posted August 12, 2013 First of all, old post, it was from 2 years ago. Second of all, why not a G27? There are probably more G27's out there than the CSW and T500 combined... and doubled! Sure but if someone spends 400 dollars on this you would think he would get a better wheel first. I got the g25 myself btw. Share this post Link to post Share on other sites
Gunstar 615 Report post Posted August 12, 2013 I understand that, but G27 users have shown that they will do some wild mods... Perfect Pedal, ARC upgrades, ect. In fact, the low entry cost (not to mention mass market availability and compatibility) plus the wealth of mods available is probably a big factor in keeping the G27 relevant all these years. Share this post Link to post Share on other sites
Dino Negali 3 Report post Posted December 19, 2013 Bit of a thread revival here, but I'm just a noobie. I agree with Gunstar's comment - I've gone for a G27 setup on my home built rig, simply because I'm looking forward to tinkering and modding so I don't want/need to start with a high end wheel. Share this post Link to post Share on other sites
