Archived

This topic is now archived and is closed to further replies.

Question about the quick release for the SRW-S1

4 posts in this topic

So to install it, i just have to put the quick release system in my g27 and on the wheel as they say but do i have to take the usb from the SRW-S1 trough the g27 base ?

Or can i just wrap the cable around the outside of the base so that i don't have to cut holes and take the base apart from my g27 ?

 

Thanks for your help

 

Quick release system:

http://simulaje.blogspot.com.es/2012/06/volante-steel-series-srw-s1-adaptacion.html

Share this post


Link to post
Share on other sites

I'm not familiar with the sli but i do know that the hub of the g25/27's wheel comes apart with a few allen wrenches. I would thing that would be the best place to route wires because of its centeral location if (and only if), you are going to fix the display to the actual wheel. Then again, I'd want something like that always in my line of sight so id fix it to the housing for the pcb and motors are so that it wouldnt rotate out of sight when the wheel spins. If u fix it to the housing make sure the wiring is tucked out of the way of all of the moving parts so that they don't bind anything up.

Btw, how do u like that thing... I was thinking of making a hud for ac and ir?

Share this post


Link to post
Share on other sites