TheBlakAdder 0 Report post Posted March 26, 2014 So I finally go the Momo wheel in today, but I am currently having problems clamping it to the desk. I got the screw clamp working just fine, but there are two clamps on both sides of the screw clamp. Do these pull down, because I tried pulling them down and they didn't want to budge. Any help would be great! Share this post Link to post Share on other sites
Krassi 692 Report post Posted March 26, 2014 To operate with this 2 clams you must remove small cover on the top of the wheel , just remove it with hand...there is a logitech logo on this cover....when you remove it you will see the heads of the 2 clams and you can rotate it:) Share this post Link to post Share on other sites
TheBlakAdder 0 Report post Posted March 26, 2014 Ah, sweet got it! But now another problem has arose, when plugged in, the left LED blinks and the wheel spins. And after that it just shuts off. Possibility of defective wheel? Share this post Link to post Share on other sites
Krassi 692 Report post Posted March 26, 2014 Ah, sweet got it! But now another problem has arose, when plugged in, the left LED blinks and the wheel spins. And after that it just shuts off. Possibility of defective wheel? Explain with more details or better do video to check it. Share this post Link to post Share on other sites
TheBlakAdder 0 Report post Posted March 26, 2014 Okay when I plug the USB plug into my computer, the left LED light will start blinking while the wheel turns to the right and then centers. Right after that, the LED stops blinking and the wheel appears to shut off. Share this post Link to post Share on other sites
Krassi 692 Report post Posted March 26, 2014 and you dont see it in windows and stays like switched off? try to plug it in other USB port Share this post Link to post Share on other sites
TheBlakAdder 0 Report post Posted March 26, 2014 It was detected in Windows and installed the drivers, will try another port. Share this post Link to post Share on other sites
TheBlakAdder 0 Report post Posted March 26, 2014 Still no dice, does it need Logitech Gaming Software to turn on or anything? Because i'm having problems getting the older version of it to work with Windows 8.1 Share this post Link to post Share on other sites
