Search the Community
Showing results for tags 'v3'.
Found 17 results
-
SOLD - FS - Fanatec V3 Inverted Pedals, Shifter, and Handbrake
GMBJRSTI posted a topic in Sim Gear - Buy and Sell
Hello, I am selling my SIM Racing gear. Unfortunately I have not used and decided to sell. All are adult owned, barely used, and like new condition. FREE Ground Shipping to continental US. Fanatec Clubsport V3 Invetrted Pedals with Damper & Brake Performance Kit. $500 Shipped - SOLD New this combo is over $700 plus shipping. Fanatec Clubsport Shifter SQ V 1.5 with USB Adapter. $170 Shipped - SOLD Fanatec Clubsport Handbrake V1.5. $100 Shipped - SOLD PM for any questions. PayPal and shipping right away. Thanks, -
We have 3 brand new Fanatec v3 pedals now in stock. Originally in stock to go on turn key simulators, but we'll be switching over to Heusinkveld in the near future. Comes with original everything, and not 1 minute of use on any pair. $30 off retail, customer pays shipping. - Verified iRacing flea market seller - Company - SimWorks Performance
-
This is just a feeler. want to see what the price points would be on here as I am new to this forum. I am debating on buying new but lets see whats out there!
-
Looking for new or used(good condition) CSW V2 or newer base as well as V3 pedals. Will provide shipping label for them so no worries of shipping cost on your end. Let me know what you got!
-
Found: * ISO WTB FANATEC Clubsport Pedals V3 Damper Kit
SuperClyde45 posted a topic in Sim Gear - Buy and Sell
Looking for a new or slightly used Fanatec Clubsport V3 Damper Kit. #CSP V3 DK -
SOLD - Fanatec ClubSport Pedals V3 USA Model: CSP V3 NEW Open box
SuperClyde45 posted a topic in Sim Gear - Buy and Sell
Brand New. Open Box. All Contents are there. Physical box has some wear. I took pictures of the box. It's just superficial. The pedals are new, and not damaged. Must Include ISRTV in your offer! This allows me to know that you used this link, which equates to me having lower fees from eBay, which translates to me being able to be more "Negotiable" on your offer. Thank you. http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575378759&campid=5338273189&customid=&icep_item=153038174649&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg&toolid=11111 Fanatec ClubSport Pedals V3 USA Model: CSP V3 NEW Open box -
WTB Fanatec V3 Pedals or Fanatec CSL Elite LC Pedals
Emowaffle1648 posted a topic in Sim Gear - Buy and Sell
Want to buy pedals for cheaper than what the website sells them for. (CSL Elite Pedals LC are out of stock sadly) thank you. I stay in the US. -
Hello Racers, For sale I have a like-new Fanatec ClubSport Pedals V3. I purchased this set back in October new from Fanatec. I've used this for less than 30 hour hours of game play. Looking to sell for $300 shipped. Thanks for looking!
-
NLR GTultimate + OSW wheel. Will it work?
The Angry Arab posted a topic in Sim Racing Rigs / Cockpit
Hi guys. I've skimmed youtube for Next Level GTultimate v2 cockpits and OSW wheels, and I have not found one video that can explain to me if this wheelstand can keep a DD wheel on it.. All the Inside Sim Racing videos I've seen of this rig only shows Thrustmaster wheelsets.. I'd like to know how to attach a DD wheel to the GTultimate wheelstand.. I'm mainly looking at a SimCUBE mige set.. Well...... I did find this video https://www.youtube.com/watch?v=67LeMOOFg_s but it shows a hybrid solution where it rests on the desktop also.. I'm not gonna have a desktop behind my GTultimate set, so I'm wondering if there is a smart solution on how to attach a DD wheel to this wheelstand.. Any experiences, anyone? -
Hi, I've found a few other posts on this topic, but none have solved my issue. I also wanted to share my experience so far with Fanatec Customer Service, but I'll start with my issue and what I've tried I received and installed my CSP V3 pedals last night. The firmware update process failed and they appear to be bricked. I'm running Win10/x64/Fall Creators edition update. I've tried: Plugging the pedals into a different USB port - Windows still doesn't detect that they're plugged in Plugging the pedals into a different Windows 10 PC - Windows still doesn't detect that they're plugged in Manually updating via FwPedalsUpdater.exe - it says "Device not detected. Verify device is in bootloader mode". Tried two older driver versions with the same results I don't have the logs since I uninstalled and reinstalled the drivers, which I guess deletes the logs. But from what I remember, it went through firmware removal, then failed at some "Program/Verify Process". I will try the same on a Windows 8 PC tonight. And now for my abysmal experience with Fanatec customer service. Here's what I sent originally: And what I received as a response: What??? Buy a new PCBA? My response: I don't want to return these things, but holy cow that's bad customer service. Hoping you guys have some advice... thanks - Neil
-
Hey ISR, long time lurker, second time poster. I've previously sold on here before and figured I'd do it again as I can't seem to make up my mind about racing in general. All of this stuff has been well-maintained and will be re-cleaned before sending. Pictures aren't the greatest, but I can take more if interested. CSW Base has minor cosmetic damage from an issue with USPS when item was sold previously. I spoke to Fanatec and the item was shipped, fixed, and returned. I've used it sparingly since, and it's time to move on. Purchased on 9/07/15. CSW Pedals V3 are brand new. These were purchased on 12/16/2015. I doubt they have 10 total hours on them as I seem to only be able to play iRacing for an hour a day. CS Steering Wheel has minor cosmetic damage. No issues, all buttons and shifters work properly. I love this wheel, as it just seems to be a nice piece of engineering. Everything clicks and snaps into position. Makes me kind of hate my actual vehicle's steering wheel. CSL Wheel Stand was purchased the same day as the Base. I used it for a few days and then I got sick of my chair moving, so I ended up making a custom seat. Stand comes with original packaging in original box, but is quite heavy, so may not be worth to ship alone. Gear is as follows. Edit: Price updates! CSL Wheel Stand - $50 EVERYTHING ELSE SOLD. Prices are negotiable. This stuff has been incredibly well taken care of and I hate to have it sit around, but I definitely want to get a fair price. Definitely send me any reasonable offers I'm located in Syracuse, NY (13031). Please advise if you have a specific shipping company and give me an idea of shipping costs if you can. I'm going to spend a bit of extra money on even more bubble wrap this time, so it may change the shipping a bit. If interested, send me a PM with the item you're interested in, and I'll get back to you. Items were tested once again this morning to verify no issues and work perfect. Can provide video of things working if you'd like. Thanks
-
Hi guys I'm planning to buy the V3 motion platform, and I am using VR. I see that it has VR compensation, and that's generally a good thing.. But will this stop me from having positional tracking? Can I no longer lean inwards, outwards and to the sides when in a car?
-
For Sale - 1 very lightly used Fanatec ClubSport Pedals V3 I built a gaming computer for use with iRacing and do not have time to use it so I am selling the Fanatec ClubSport Pedals V3. The Fanatec ClubSport Pedals V3 have seen very little use, If I had to guess I would say somewhere around 20-30 hours. Comes with usb cord, D shaped pedal plates, and quick guide. I do not have original box. $240.00 USD shipped - Will ship to United States 48 states only - email: [email protected] - paypal: [email protected] -
It became a duplicate when I posted the original. delete this one
-
Hi guys I'm planning to buy the V3 motion platform, and I am using VR. I see that it has VR compensation, and that's generally a good thing.. But will this stop me from having positional tracking? Can I no longer lean inwards, outwards and to the sides when in a car?
-
Looking for CSP V1 or V2 pedals.
-
Does anyone have experience using a USB hub to get all the different items connected to a pc? I just ordered the V3 pedals and have the TX150 wheel, TH8A shifter, T3PA pro pedals and Hotas X flight stick. Should it be powered? Should it be usb 2 or 3? Any guidance would be appreciated
