Search the Community
Showing results for tags 'shifter'.
Found 74 results
-
FS : Magnetic Shifter Set for Fanatec F1 Wheel - INTL
Marc211 posted a topic in Sim Gear - Buy and Sell
For sale : Magnetic Shifter Set for Fanatec F1 Wheel 20USD + SHIPPING PM if interested -
WTB: Dead Thrustmaster th8a shifter, bad PCB board
Jok3sta posted a topic in Sim Gear - Buy and Sell
As the title says. Im looking for a non working th8a shifter. I ordered the wrong pcb board for my th8rs and now I have one for a th8a. I would love the find a broken shifter in need of the pcb board so i can fix it and use it as an ebrake. If i cant find one Im probably going to put the pcb board of for sale -
Hello. Let me present for you Aiologs SQ Shifter and Handbrake v3. Page for order http://shop.aiologs.net
-
DIY G25 shifter interface with H-pattern, sequential and handbrake modes
pascalh posted a topic in Logitech Mods
A few weeks ago my son switched from his old G25 wheel/shifter combo to a brand new Thrustmaster TX + F1 addon wheel. In the process he lost the G25 shifter that he used mainly for Nascar and MX5 racing. To get a working shifter, there were several choices: Buying a new shifter: obvious but expensive Use the G25 shifter connected to the wheel without using the wheel: inelegant! Buying a Leo Bodnar interface (http://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=72&products_id=188): cheap and easy Build our own interface: even cheaper and more versatile We chose the latter option to have the best possible control on the gear shifting logic: the stock G25 shifting logic is somewhat buggy, leading to quite frequent mis-shifts. Having full control of the software also allows adding some new functions: a handbrake mode seems the most obvious as the G25 shifter has all the necessary hardware. In the following posts I will explain all the steps required to build a G25 shifter to USB interface, based on a Teensy 2.0 board. This writeup is split into 5 chapters, each chapter being one post: Chapter 1: Hardware and tools required Chapter 2: Wiring and canning Chapter 3: Software Chapter 4: Tests and configuration Chapter 5: Conclusion- 206 replies
-
- 1
-
-
- handbrake
- sequential
- (and 6 more)
-
Hey, i just joined the Sim-racing community by purchasing a used Fanatec Gt3 rs v2 Wheel. It came with Fanatec Pedals and a H-Shifter. The previous owner already calibrated all the devices and installed a firmware. I only had to download the Fanatec driver. In the Fanatec engine, everything works, the steering, the pedals and also the shifter. If i change the gears it shows the different gears in the engine . That means the shifter works. In Forza Horizon 4 my steering works, the Pedals work and the Shifters on my steering work. But my H-shifter does not work. I went into the wheel keybinding settings. When i try to bind my 1st gear on the H-shifter to the 1st Gear in the game, it does not recognize any input.. Anyone know how to bind the shifter to the gears in the game? I saw its working in Forza horizon 3. Im really frustrated..
-
thrustmater tx Sim racing noob WTB best option for my current XB1X until I can build my PC
Seth Wooten posted a topic in Sim Gear - Buy and Sell
Sim noob looking for best equipment for a beginner with 1000s of hour of simcade on console controller. -
H shifter / Sequential Actual value - shifter $150, Sparco Tecno knob $80 ( $230 total ) Selling for $180 email me at [email protected]
-
SOLD - Frex Sequential Shifter with controller
pawelmilner posted a topic in Sim Gear - Buy and Sell
Actual value ~$140 Selling for $99 email me at [email protected] -
Sequential Shifter $150 Includes: Plug & Play USB, Hardware for Hard Mounting, Table/Desk Clamp ** FREE SHIPPING (48 States) ** Limited Quantity In Batch We can add 2 buttons on top plate for $20
-
- 1
-
-
- simspeedshop
- iracing
- (and 1 more)
-
For Sale (UK) Fanatec Clubsport Shifter Table Clamp, boxed, excellent condition
Mascot posted a topic in Sim Gear - Buy and Sell
Excellent condition. These cost €39.95 + €17.12 standard delivery (or €31.87 express delivery, if you're crazy) from Fanatec = €57.07 (or €71.82 for crazy people), which equates to around £50 (£63 crazy). I'll sell this for £30 including delivery to UK mainland, saving you £20 (or saving £33 if you are crazy). I'm relatively new to this forum but have a good presence on Race Department, ResetEra, GT Planet and some other sim racing forums. It'll be bubble-wrapped to within an inch of its life, boxed in it's original outer box and dispatched quickly. No haggling please, I've priced this to sell and think the savings are fair enough. Payment would be by fee-free PayPal Friends and Family please. Fanatec product page https://www.fanatec.com/eu-en/wheel-stands-table-clamps/clubsport-shifter-table-clamp-eu.html Clamping system allows for endless height adjustments when connected to the ClubSport Shifter’s T-slot rails CSS and CSS SQ can be mounted on either side, right or left and can even be screwed onto the top of the table clamp Rock solid table mount with two metal screws Metal design Maximum size of the table board/desktop that the table clamp is able to lock is 7,7 cm Some photos: It goes without saying (but I have to say it in this world we live in), only the clamp is included. My floor, my walls, the table, the wheel stand, the steering wheel, the pedals... everything else in the images is NOT included. -
RS1 PRO Pedals Upgrade Kit Black - Used for a week. When I received the package from rseat, two edges (see pictures) were poking through the box and the paint was stripped off. You won't see it once the pedal kit is installed on the rig. Another thing is one of 4 mounting holes on the bottom of the kit came stripped so I had to make a new mounting hole. It doesn't affect rigidity and not visible once installed. $140 shipped to lower 48 states. RS1 Shifter Upgrade Kit Support Fanatec Clubsport Shifter, Thrustmaster HOTAS Warthog - Brand new in box. $90 shipped to lower 48 states. -
Ugh... I took a chance that all the negative press about Fanatec's poor quality and customer service was finally behind them and bought a complete Clubsport system. I love the products, they are all incredibly good in operation... but my Clubsport Shifter SQ v1.5 just broke while I was driving! I had it in sequential mode, and there was a snap, and the stick stopped returning to center. It feels like the centering spring inside broke or something. Has anyone else experienced this, or is there a fix online? I've searched and I can't find anything about it. Moving the lever from sequential to H pattern feels a little looser than it used to, but switching it to H and SEQ made no difference, it won't work on SEQ. (I'm having trouble with the Clubsport Wheel v2 as well... it's started making a high pitched squealing noise whenever it is on. Needless to say, I am not happy. How can they charge this much and have such poor build quality? These things are WAY too expensive to be having all kinds of problems barely a year after purchase.) *EDIT* I opened the internals up and figured out the problem. Following is a picture of the internals of the shifter as they are SUPPOSED to be. The two metal bars in the middle are the spring that forces the stick to recenter when in SEQ mode. The springs have popped loose and are now sitting as I drew, with the orange arrows showing which one has moved to where. I can probably fix this... I hope, but I'm still wondering if anyone else has had this problem? It's ridiculous that the spring isn't properly captured and has any chance AT ALL of coming loose! If I do fix it, I'm going to also have to try and figure out a way to better capture the spring, or I suspect it will just do this again, probably easier now that it has done it once... Clubsport shifter spring as it should be, and as it is having popped loose.
-
****** SOLD ****** For Sale: ClubSport Shifter Table Clamp As-new immaculate condition. These cost €39.95 + €17.12 standard delivery (or €31.87 express delivery, if you're crazy) from Fanatec = €57.07 (or €71.82 for crazy people), which equates to around £50 (£63 crazy). I'll sell this for £30 delivered to UK mainland, saving you £20 (or saving £33 if you are crazy). I'm relatively new to this forum but have a good presence on Race Department, ResetEra, GT Planet and some other sim racing forums. It'll be bubble-wrapped to within an inch of its life, boxed in a boxy box and dispatched quickly. No haggling please, I've priced this to sell and think the savings are fair enough. Payment would be by fee-free PayPal Friends and Family please. I've got a set of CSL Elite Pedals LC (the three-pedal load cell version) and a CSL Elite Steering Wheel P1 for sale too if anyone's interested. I'll list those separately when I have time but PM me by all means if you're interested. Fanatec product page https://www.fanatec.com/eu-en/wheel-stands-table-clamps/clubsport-shifter-table-clamp-eu.html Clamping system allows for endless height adjustments when connected to the ClubSport Shifter’s T-slot rails CSS and CSS SQ can be mounted on either side, right or left and can even be screwed onto the top of the table clamp Rock solid table mount with two metal screws Metal design Maximum size of the table board/desktop that the table clamp is able to lock is 7,7 cm Some photos. It goes without saying (but I have to say it in this world we live in), only the clamp is included. My floor, my walls, the table, the wheel stand, the steering wheel, the pedals, my bookcase, my soul... everything else in the images is NOT included.
-
Selling my Thrustmaster TH8a shifter. Comes with Ricmotech short throw H pattern adapter and sequential plate. I have misplaced the cable that connects the shifter to a Thrustmaster wheel base. I do have the usb cable that will plug into the computer. Asking for $85 (includes shipping to lower 48 states) No international shipping. Must have PayPal confirmed shipping address. Let me know if you have any questions. ITEM HAS SOLD.
-
Wtb fanatec shifter and bmw gt2 wheel
-
I have a like new thrustmaster TH8a shifter. Used only once. It is just too complicated for me I am a beginner. $139 shipped CONUS
-
Selling - Logitech G920 + Pedals + G27 Shifter
p4nc4kemix4u posted a topic in Sim Gear - Buy and Sell
Sold -
ClubSport Static Shifter Paddles Compatibility
Kawlos Ghroomez posted a topic in General Hardware Questions
Hey guys, I have sorted out the basic foundations for my rig and just need some advise for the finer details. I'm getting a Sim-plicity DD Wheel and I would like some paddle shifters. I was originally leaning towards ascher racing, but they will cost 187EU for the plate and shifters plus whatever for P&P (could probably push to get it free). Wanting to save a little money somewhere, I was wondering whether the Fanatec ClubSport Static Shifter Paddles (100EU) would work with the Sim-plicity unit pretty much plug and play or if anyone has any experience with trying them with any other DD Units. I could probably get these posted free also as I'm still awaiting my V3 Inverted Pedals, so they won't add much if anything to that weight. Anyway, any help would be grateful, otherwise I will just put out with a standard H shifter for the beginning and save for the rest later on! -
For Sale in CA! RSEAT RS1-Fanatec-Thrustmaster Sim Rig
imagamejunky posted a topic in Sim Gear - Buy and Sell
Perfect condition, lightly used, works pefectly! This RS1 rig is A LOT of fun but I just don't use it enough. I have almost all of the original boxes and paperwork. You won't find a nicer used Sim Rig. This RSeat RS1 rig is beefy and professional feeling. You won't be disappointed. All of the following items are included. The prices shown are what you would pay new. RS1 Assetto Corsa Special Edition- Red/Black $999.00 https://rseatamerica.com/index.php?route=product/product&path=59&product_id=125 RS Stand S3 V2 Black TV Stand for up to 65 inch TV $369.00 https://rseatamerica.com/index.php?route=product/product&path=61&product_id=72 Static Keyboard and Mouse Tray Black $159.00 https://rseatamerica.com/index.php?route=product/product&path=62&product_id=118 Also includes this keyboard and mouse mount (came with Assetto Corsa Edition) https://rseatamerica.com/index.php?route=product/product&path=62&product_id=58 N1 Shifter/Handbrake Upgrade Kit Black $129.00 https://rseatamerica.com/index.php?route=product/product&path=62&product_id=129 RS1 Speakers Mount Kit Black $99.00 https://rseatamerica.com/index.php?route=product/product&path=62&product_id=61 RS1 Buttkicker Upgrade Kit Black $99.00 https://rseatamerica.com/index.php?route=product/product&path=62&product_id=56 Logitech Z906 5.1 Surround Sound Speaker System $300.00 https://www.bestbuy.com/site/logitech-5-1-500-w-speaker-system-ipod-supported-multi/4580243.p?skuId=4580243 Thrustmaster VG Ferrari 599XX EVO 30 Alcantara Edition 30cm/11.8" Wheel $200.00 https://www.amazon.com/Thrustmaster-Ferrari-599XX-Alcantara-playstation-4/dp/B014US048A Thrustmaster VG T3PA-PRO 3 Pedal Add on Set $150.00 https://www.amazon.com/Thrustmaster-T3PA-PRO-3-Pedal-Add-xbox-one/dp/B00UVN21IU/ref=sr_1_1?s=videogames&ie=UTF8&qid=1517254688&sr=1-1&keywords=t3pa%2Bpro&th=1 Thrustmaster T300RS Wheel- 1080 degree Force Feedback Servo Motor $400.00 https://www.amazon.com/Thrustmaster-Officially-Licensed-Feedback-playstation-4/dp/B00O8B7D02/ref=sr_1_4?s=videogames&ie=UTF8&qid=1517254729&sr=1-4&keywords=t300&th=1 Fanatec Clubsport Shifter SQ Sequential V1.5 US + USB adapter $220.00 https://www.fanatec.com/us-en/shifters/clubsport-shifter-sq-us.html Fanatec Clubsport Handbrake US + USB Adapter $140.00 https://www.fanatec.com/us-en/sim-racing-hardware/clubsport-handbrake-v1-5.html I've got over $3800 into these parts including shipping and tax. Make me a serious cash offer. I'm not giving this stuff away. I really don't want to ship this out. Come pick it up in Livermore, CA 94551. All serious offers considered. **PC components and TV are NOT included** Thanks for looking. Message me with questions/offers. Nick "imagamejunky" -
Hey everyone, looking to buy a thrustmaster th8a or th8rs new or used but in good condition. Trying to get a deal cause 200$ is too much for my budget. Seller has to be willing to ship it.
-
Hey guys looking to add a shifter mount to my wheel stand pro for thrustmaster tx. I have seen the RGS add on but 100$ seems a bit steep for a piece of metal with a plate. I had the idea of mocking one up in PVC but wanted to see if others have had any success doing it any other way or if there are any tutorials or plans that exist currently. Look forward to hearing from you guys.
-
Looking to purchase the Wheel Stand Pro Rgs shifter mount for the TH8A. Live in Central Pennsylvania but am willing to pay shipping ( as long as it is reasonable). Thanks!
-
ı know that you guys get asked this thousand times a day and you might be sick of answering it but Can ı use a usb shifter in this case tha8 or thrs with the any of the logitech racing wheels will it work ?
-
WTB: Thrustmaster TH8A Shifter or Fanatec Clubsport Shifter
aston6 posted a topic in Sim Gear - Buy and Sell
Looking to purchase a Thrustmaster TH8A shifter or Fanatec Clubsport Shifter (either sq or regular). I live in central Pennsylvania but am willing to pay shipping. Please help me out! I have looked everywhere to find one and have had no luck. -
SOLD Hey guys, I am selling my Thrustmaster THR8S shifter, which works on the PC and Playstation 3. I am the original adult owner of the shifter, I won it in an ISR sim racing contest several years ago. I used it sparingly in Sequential mode and only recently used it in H mode. The shifter works great. I am including the Basherboards short shifter throw shaft pre-installed, which makes the H mode shifting much more realistic. I am including the longer stock shaft as well. The shifter comes with the original packaging, both the H and Sequential mode plates and free USPS Ground Shipping anywhere in the US. I have it listed on ebay for $120, but I am knocking $10 off the price for the sim racing community. PayPal only. https://www.ebay.com/itm/Thrustmaster-THR8S-Shifter-Being-Sold-by-Original-Adult-Owner/282816571967
