Search the Community
Showing results for tags 'compatible circut'.
Found 1 result
Cody Hayley posted a topic in Thrustmaster ModificationsHey everyone, Figured I'd share my latest button plate project that I'm currently working on for my T300 base. I based the design off the steering wheel used in the Bentley GT3 racecar using a top mounted button plate rather than having the plate behind the wheel. I previously made a behind wheel mounted button plate a while back and wanted to go for a different design. After a few hours of drafting on AutoCAD I came up with a plate design and button placement I was satisfied with. I cut a prototype plate from some foam board I had lying around to see how it looked with the buttons. Pretty good if I do say so my self For this project I am using the TM compatible circuit by Moogen which can be found here: The circuit allows for both console and PC compatibly while maintaining the TM quick-release connection and includes inputs for 13 buttons, 4 d-pad inputs and 2 paddle shifters. I was amazed at how small and compact the circuit board is, making it perfect for button plate projects. I used push buttons for all 13 inputs and 2 toggle switches for the d-pad with the left switch being UP and DOWN and the right switch being LEFT and RIGHT directions. The wheel I am using is a 320mm NRG suede. To keep the plate raised off the steering wheel I'm using 1/2" plastic spacers which gives tons of space beneath the plate for the circuit board and all the wiring. Because of the placement of the DIN connector on the circuit I'll have to leave 1 screw out when bolting the wheel to the DSD adapter. For the paddles I tried mounting them to a backing plate using hinges and springs. With the push button I'm using and the tension of the spring the paddles have a nice firm and tactile feel comparable to my 599XX rim even using the foam board prototype. I wired up all the buttons and switches and checked each input using the TM profiler to make sure it was working before using shrink tubing to tidy everything up. The next step is to cut and drill the button plate, paddle shifters and the shifter mounting plate. I plan on using 4mm polycarbonate sheet for the plate and paddles and covering it with carbon fibre vinyl wrap. Once this is done and the DSD adapter arrives everything will be ready to be assembled! I'll post an update when the project is finished. - Cody