Search the Community
Showing results for tags 'clubsport'.
Found 74 results
-
FA - Fanatec Clubsport Pedals V1, non-working
DeaconBlooze posted a topic in Sim Gear - Buy and Sell
Currently for auction on Ebay: https://www.ebay.com/itm/Fanatec-Clubsport-Pedals-V1-Sim-Racing/273865528045 These are being sold as non-working. When plugged into USB, it shows the USB device as not recognized. The USB port on the board was replaced, but did not solve the problem. There is a 3rd party board that may work, and the link to that is below: https://www.mainperformancepc.com/product/simpedal-accessories/main-performance-pc-pedal-controller-circuit-board The pedals will be securely packed and shipped in a Fanatec Clubsport v3 pedal package. -
FOR SALE: Fanatec Clubsport Wheel Base V2 - $450 (Sold) Fanatec BMW GT2 320mm Clubsport Rim - $190 (Sold) Fanatec Formula Clubsport Rim - $125 All item pictured in detail below. All items come in original shipping and display boxes with respective accessories! Very little wear on formula rim, it was used a couple of times. Normal wear on the BMW rim. All items purchased January of this year. The prices are firm! Please PM me for shipping details, depending on where you are we can work something out! Located in Tampa, FL if interested in local pick up. Thank you for looking! UPDATE: ONLY HAVE FORMULA RIM LEFT -Tyler
-
CS SQ 1.5 shifter not working in H pattern with Assetto Corsa on ps4.
jmoses77 posted a topic in Fanatec
I recently obtained a club sport shifter for my CSL Elite set up along with the load cell kit. Everything works as it should in most of my games. I've updated to the most recent firmware and calibrated everything. The shifter works flawlessly in both sequential and H pattern mode on every game that I play,GT sport, Forza, and Project Cars. When I play Assetto Corsa, however, only the sequential shifter works. No matter what my settings or what car I am driving the H pattern shifter doesn't work. My question is, is this normal? Do I need to plug the shifter directly into the ps4 via USB or am immersing something in the game settings? For in game settings I have the H pattern enabled, auto clutch off, and auto shift off. Any help would be much appreciated. Cheers -
I have a low time Fanatec Clubsport Handbrake v1.5. Bought it last year with my other stuff but I never got into rallying, so it'a barely used. Comes with everything you see in photo including the optional USB adapter. I can't find the wire for CSW v2 pedal connection, but you can always connect directly via USB. $120 plus actual shipping. Paypal accepted. I am on the Recommended Sellers List.
-
SOLD: Fanatec ClubSport Steering Wheel BMW GT2 (USA)
CreepyVanMan posted a topic in Sim Gear - Buy and Sell
Very light use and has all original packaging. Works as new. Upgraded to an AccuForce and don't use this rim now. $265 Shipped to lower 48 states Payment via PayPal. Buyer pays fees or does "friend" payment to avoid fees. If you have any questions, please ask -Andrew -
Hi, Just did a complete upgrade and I am selling my previous rig which is in excellent condition it contains: 1) Fanatec clubsport v2 wheel base + Formula Rim + Universal Rim with a Mitsubishi Lancer wheel 2) Fanatec pedals v3 (almost new) with extra load cell for reserve. Original box. Still under warranty 3) Geko seat with motion (https://www.gekosystems.com/) with custom support for shakers and rings for easy connect to next level wheel stand 4) Next level wheel stand. Original box Asking 2700 USD for everything. You can pick up in my house. Can be sold separatelly If you want shipping estimates, please PM me. -
I collected a couple of these in anticipation of going the OSW route, but they are now surplus to requirements.They normally cost €25 + €17 shipping = €42 (plus currency conversion) from Fanatec.I'll sell them for £20 each including shipping. PayPal F&F Gift payment to avoid fees.Have one, have both, have neither. The choice is yours! Stock photo: Fanatec product page:https://www.fanatec.com/eu-en/sim-racing-hardware-accessories/clubsport-usb-adapter-eu.htmlClubSport USB AdapterModel: CS USBSeries: ClubSportPCFull compatibilityConnect your Fanatec devices via USB to your PC to make it compatible to almost any modern racing simulation.ClubSport ShifterUse Fanatec peripherals like your ClubSport Shifter (CSS or CSS SQ) with your Logitech G27 or Thrustmaster T500RS or any other wheel on PC.ClubSport HandbrakeThe ClubSport Handbrake requires connection to a Fanatec product with dedicated handbrake port by default. With this adapter you can use it as standalone device on PC.Features Use your ClubSport Shifter with any racing wheel on PC (supports sequential and h-pattern mode) Operate the ClubSport Handbrake without another Fanatec product with handbrake port add USB functionality to analog Fanatec Pedals Upgradable firmware Enables 7th gear on all wheels (not only if connected to CSW) CompatibilityControllers: ClubSport Shifter ClubSport Shifter SQ ClubSport Handbrake CSL Elite Pedals (analog pedals without CSL Elite Pedals Loadcell Kit) Games: Most PC racing games which support multiple input devices. Example: Assetto Corsa,iRacing, rFactor2, Project CARS and many more! Special Notes If operated with the ClubSport Handbrake or analog pedals, the device needs to be updated with a different firmware. Therefore, please enter the driver menu, navigate to the update tab, click on "Update USB Adapter Firmware", select your mode and hit "start update". To calibrate the shifter you need to run the calibration program in the driver on PC Don't eat yellow snow (just checking to see if anyone has read this far) What's included USB Adapter My eternal thanks
-
(640x548).thumb.jpg.f29fc1753e045dedd07218afe90978ed.jpg)
Fanatec Rim Conversion Kit by Sim Racing Machines
Seth Francis posted a topic in Sim Gear - Buy and Sell
Hello again, Today I have a brand new SRM (sim racing machines) USB and quick release conversion kit for Fanatec Clubsport rims. This kit was given to me by a fellow sim racer in exchange for some repair work I did. The kit is 100% brand new and has never been installed. This kit comes with an adapter to mount an aftermarket quick release to your Clubsport rim as well as the teensy LC PCB for converting the Clubsport rim to USB. This kit is meant for a 70mm QR1 quick release. Please note the 70mm holes are threaded, so the quick release should not have threads itself. If the quick release you are using does have threads you can drill out the threads in this adapter and use the threads in the aftermarket quick release. Also includes the upgraded DIN connector for connecting the coiled cable to the USB cable as shown in the pictures. This kit is for the BMW/Porsche/Formula rims but it may also work with the universal hub with some light modification (the Universal Hub uses a 12 pin connector rather than the 8 pin used by all other clubsport rims). Please note that this does not work with elite line of rims. Installation is rather straight forward if you are comfortable working with this type of stuff and have a bit of mechanical/electronic service ability. The hardest part is removing the stock quick release without putting too much force on the internal wiring such as that for the joysticks, shifters etc. The second hardest part is unplugging the stock Fanatec harness from the stock Fanatec PCB inside the rim, it is possible to cause damage if you are not careful and put too much force on the connector or solder joints. If you are not confident performing the installtion yourself I do offer installtion services out of Connecticut USA. You could either ship your rim to me or meet me if you are local. If you are buying this kit from me, I would perform the installtion for an additional $40 USD. In this case you would receive your rim back with the kit fully installed and functional, I would also instal the quick release you are using if you send it along with the rim. I have been working on sim racing hardware for approximately 5 years now and have worked with similar technology for many more years so your rim would be in good hands This kit, with the included DIN connector normally costs $89 GBP (approximately $122 USD) plus postage (approx. $21 USD). I am offering this kit brand new shipped (within continental USA) for $115 USD. Link to this item on the SRM website: https://www.simracingmachines.com/WebShop/fanatec-conversion -
For Sale (UK) Fanatec Clubsport Shifter Table Clamp, boxed, excellent condition
Mascot posted a topic in Sim Gear - Buy and Sell
Excellent condition. These cost €39.95 + €17.12 standard delivery (or €31.87 express delivery, if you're crazy) from Fanatec = €57.07 (or €71.82 for crazy people), which equates to around £50 (£63 crazy). I'll sell this for £30 including delivery to UK mainland, saving you £20 (or saving £33 if you are crazy). I'm relatively new to this forum but have a good presence on Race Department, ResetEra, GT Planet and some other sim racing forums. It'll be bubble-wrapped to within an inch of its life, boxed in it's original outer box and dispatched quickly. No haggling please, I've priced this to sell and think the savings are fair enough. Payment would be by fee-free PayPal Friends and Family please. Fanatec product page https://www.fanatec.com/eu-en/wheel-stands-table-clamps/clubsport-shifter-table-clamp-eu.html Clamping system allows for endless height adjustments when connected to the ClubSport Shifter’s T-slot rails CSS and CSS SQ can be mounted on either side, right or left and can even be screwed onto the top of the table clamp Rock solid table mount with two metal screws Metal design Maximum size of the table board/desktop that the table clamp is able to lock is 7,7 cm Some photos: It goes without saying (but I have to say it in this world we live in), only the clamp is included. My floor, my walls, the table, the wheel stand, the steering wheel, the pedals... everything else in the images is NOT included. -
Ugh... I took a chance that all the negative press about Fanatec's poor quality and customer service was finally behind them and bought a complete Clubsport system. I love the products, they are all incredibly good in operation... but my Clubsport Shifter SQ v1.5 just broke while I was driving! I had it in sequential mode, and there was a snap, and the stick stopped returning to center. It feels like the centering spring inside broke or something. Has anyone else experienced this, or is there a fix online? I've searched and I can't find anything about it. Moving the lever from sequential to H pattern feels a little looser than it used to, but switching it to H and SEQ made no difference, it won't work on SEQ. (I'm having trouble with the Clubsport Wheel v2 as well... it's started making a high pitched squealing noise whenever it is on. Needless to say, I am not happy. How can they charge this much and have such poor build quality? These things are WAY too expensive to be having all kinds of problems barely a year after purchase.) *EDIT* I opened the internals up and figured out the problem. Following is a picture of the internals of the shifter as they are SUPPOSED to be. The two metal bars in the middle are the spring that forces the stick to recenter when in SEQ mode. The springs have popped loose and are now sitting as I drew, with the orange arrows showing which one has moved to where. I can probably fix this... I hope, but I'm still wondering if anyone else has had this problem? It's ridiculous that the spring isn't properly captured and has any chance AT ALL of coming loose! If I do fix it, I'm going to also have to try and figure out a way to better capture the spring, or I suspect it will just do this again, probably easier now that it has done it once... Clubsport shifter spring as it should be, and as it is having popped loose.
-
**SOLD** (UK) Fanatec Clubsport Pedals CSPv1, boxed, just serviced
Mascot posted a topic in Sim Gear - Buy and Sell
***SOLD*** This is a sale for my Fanatec Clubsport Pedals CSPv1 in silver anodised aluminium.I serviced these yesterday which included a lithium grease relube and replacement of the brake load cell elastomer with a brand new one. The current load cell works fine but I'll also include a spare new one. You'll notice that there's a small box fitted to the underside of the brake pedal. This is purely to keep the wires from the load cell neat and tidy, as (like a lot of people) I used the sensible trick of splicing a new load cell to the plug connectors of the old one. This saves spending £30 + shipping from Fanatac for a new load cell. If you have a new load cell with the proper plug on the end (you can sometimes find these on eBay for around £10-£12) then you can remove the box entirely as it's only held on with double-sided foam tape. The only other 'non-standard' bit on these pedals is the replacement of one of the tiny grub screws (that secures the load cell in place) with a small bolt. The ball head of my Allen key broke off in the original grub screw so I extracted the screw and drilled/retapped for a small bolt. You can see this in one of the photos.Anyway, everything is in full working order and includes all original foam packaging, inner and outer boxes, all cables, the aluminium pedal spacer blocks etc. As I said earlier, these have just been serviced and I'll include a spare load cell and a couple of used elastomers as spares. Condition is generally very good as you'll see from the photos. There are a couple of scratches on the heel plate and that's about it (and I've got no idea how they got there as I always used a heavy foam overlay in place and I always drive in socks).I'm looking for £80 + delivery, which will probably be around £15 to mainland UK using Parcelforce 48. Payment by PayPal Friends & Family gift to avoid fees please.Pics: -
Wanted: MUGEN sensors and shock Brake Mod Kit for Fanatec Clubsprt V1 Pedals
therickaman posted a topic in Sim Gear - Buy and Sell
Title describes my need perfectly. -
****** SOLD ****** For Sale: ClubSport Shifter Table Clamp As-new immaculate condition. These cost €39.95 + €17.12 standard delivery (or €31.87 express delivery, if you're crazy) from Fanatec = €57.07 (or €71.82 for crazy people), which equates to around £50 (£63 crazy). I'll sell this for £30 delivered to UK mainland, saving you £20 (or saving £33 if you are crazy). I'm relatively new to this forum but have a good presence on Race Department, ResetEra, GT Planet and some other sim racing forums. It'll be bubble-wrapped to within an inch of its life, boxed in a boxy box and dispatched quickly. No haggling please, I've priced this to sell and think the savings are fair enough. Payment would be by fee-free PayPal Friends and Family please. I've got a set of CSL Elite Pedals LC (the three-pedal load cell version) and a CSL Elite Steering Wheel P1 for sale too if anyone's interested. I'll list those separately when I have time but PM me by all means if you're interested. Fanatec product page https://www.fanatec.com/eu-en/wheel-stands-table-clamps/clubsport-shifter-table-clamp-eu.html Clamping system allows for endless height adjustments when connected to the ClubSport Shifter’s T-slot rails CSS and CSS SQ can be mounted on either side, right or left and can even be screwed onto the top of the table clamp Rock solid table mount with two metal screws Metal design Maximum size of the table board/desktop that the table clamp is able to lock is 7,7 cm Some photos. It goes without saying (but I have to say it in this world we live in), only the clamp is included. My floor, my walls, the table, the wheel stand, the steering wheel, the pedals, my bookcase, my soul... everything else in the images is NOT included.
-
Location: Waterford, MI I have a set of Fanatec Clubsport V2 Pedals in excellent condition for sale. Both cables will be included in the sale. Everything functioning as it should. $240 shipped (In the US) or $220 picked up. International shipping will be extra and I would have to get a quote. I'm sure that wouldn't be a pretty bill. PM me here or txt/call 815-572-1364
-
SOLD: Fanatec Clubsport Pedals V3 w/ Brake Performance & Damper kits (US)
tbcktu posted a topic in Sim Gear - Buy and Sell
Great condition. Used for about 6 months and kept well maintained and clean. Damper kit is brand new. Not really needed with the brake kit but can be used on the throttle pedal. Comes with everything that originally comes with this pedal set (including the alternate pedal faces and braided USB cable not pictured). Comes with brake performance kit installed but the original brake pieces are included. Ships from New England. US only. Asking for $270 (PayPal), includes shipping. SOLD!!! -
Brand New In box. Save over buying direct. Must Include ISRTV in your offer! This allows me to know that you used this link, which equates to me having lower fees from eBay, which translates to me being able to be more "Negotiable" on your offer. Thank you. http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575378759&campid=5338273189&customid=&icep_item=153038102912&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg&toolid=11111 Features Use your ClubSport Shifter with any racing wheel on PC (supports sequential and h-pattern mode) Operate the ClubSport Handbrake without another Fanatec product with handbrake port add USB functionality to analog Fanatec Pedals Upgradable firmware Enables 7th gear on all wheels (not only if connected to CSW) Compatibility Controllers: ClubSport Shifter ClubSport Shifter SQ ClubSport Handbrake CSL Elite Pedals (analog pedals without CSL Elite Pedals Loadcell Kit) Games: Most PC racing games which support multiple input devices. Example: Assetto Corsa,iRacing, rFactor2, Project CARS and many more! Special Notes If operated with the ClubSport Handbrake or analog pedals, the device needs to be updated with a different firmware. Therefore, please enter the driver menu, navigate to the update tab, click on "Update USB Adapter Firmware", select your mode and hit "start update". To calibrate the shifter you need to run the calibration program in the driver on PC Packaging Details Size (L x W x H) : 22.00cm x 15.50cm x 2.00cm Weight: 0.10kg Volume weight: 0.14kg What's included USB Adapter
-
Sold
-
I am looking to buy fanatec clubsport pedals v3 or v2 at any reasonable price shipped in US (i live in California for reference). Just PM me with any good offers and ill check it out.
-
I am looking to get started in sim racing, primarily iRacing. I am not worried about wanting to sell my wheel because I know I will use it as I play many other racing games. I am just wondering Which wheel I should purchase. Should I buy a cheaper beginner wheel such as the T150 or should I save up and purchase something like a T300 or even a fanatec? Thanks.
-
Sold.
-
ClubSport Static Shifter Paddles Compatibility
Kawlos Ghroomez posted a topic in General Hardware Questions
Hey guys, I have sorted out the basic foundations for my rig and just need some advise for the finer details. I'm getting a Sim-plicity DD Wheel and I would like some paddle shifters. I was originally leaning towards ascher racing, but they will cost 187EU for the plate and shifters plus whatever for P&P (could probably push to get it free). Wanting to save a little money somewhere, I was wondering whether the Fanatec ClubSport Static Shifter Paddles (100EU) would work with the Sim-plicity unit pretty much plug and play or if anyone has any experience with trying them with any other DD Units. I could probably get these posted free also as I'm still awaiting my V3 Inverted Pedals, so they won't add much if anything to that weight. Anyway, any help would be grateful, otherwise I will just put out with a standard H shifter for the beginning and save for the rest later on! -
(UK) Fanatec Clubsport Pedals V3 & Damper Kit; Buckfink Holger Q1R 70mm wheelside only & Accuforce angle mount
Furnace Inferno posted a topic in Sim Gear - Buy and Sell
Fanatec Clubsport Pedals V3 + Damper Kit More pictures and info on eBay listing: https://m.ebay.co.uk/itm/Fanatec-Clubsport-Pedals-V3-Damper-Kit/173168719773?hash=item2851a8f79d:g:V7oAAOSwWktai1Jy Will sell on here for £350 incl. next day insured delivery (its’s £26 regardless because of cover costs for expensive item) Removed Q1R from LMP rim and switched to Accuforce so this is now going spare. £55 incl. delivery Accuforce Angle mount, upgraded to Sim-Lab P1 rig which has it’s own angle mount capabilities therefore I don’t need this anymore. Basically brand new, only 2.5 months old and used for about 15hrs pictured on old rig and currently in original shipping box. £40 incl. delivery. -
Selling a brand new, never opened Clubsport BMW GT2 wheel. Still taped up in the brown shipping box they shipped it to me in. I had an issue with my first wheel, and didn't want to wait for the replacement, so I bought another one so I could keep racing, and this wheel for sale is the brand new replacement of my original. $265 including UPS shipping, in the USA ONLY! That's price of wheel, and $15 for UPS. Same as on the Fanatec site, but no taxes for you! No photos since it's new in the box. https://www.fanatec.com/us-en/steering-wheels/clubsport-steering-wheel-bmw-m3-gt2-us.html Cheers! UPDATE: Fanatec WILL honor the warranty for buyer... Hi Jason, thank you for your email. In case you are referring to the original wheel which was replaced by us please provide the new owner a copy of the invoice from the original purchase. He then will be able to register the wheel and the warranty will be transferred to his account Best regards / Freundliche Grüße Johannes Limoli-Kirsch (Fanatec Support Team)
-
FS: Brand New In Box Fanatec Clubsport Handbrake 1.5 + Clubsport USB Adapter - Indianapolis, USA
Michael Peters posted a topic in Sim Gear - Buy and Sell
ITEM IS SOLD! Hi all! I have a brand new Fanatec ClubSport Handbrake V1.5 along with the Clubsport USB adapter purchased in early January and still sitting brand new in the box from Fanatec just as it was on the day it was delivered. Asking $120 and will split the cost of shipping with any US buyers. Best way to reach me is via email - [email protected] Thanks! -
WTB: Thrustmaster TH8A Shifter or Fanatec Clubsport Shifter
aston6 posted a topic in Sim Gear - Buy and Sell
Looking to purchase a Thrustmaster TH8A shifter or Fanatec Clubsport Shifter (either sq or regular). I live in central Pennsylvania but am willing to pay shipping. Please help me out! I have looked everywhere to find one and have had no luck.
