Search the Community
Showing results for tags 'adapter'.
Found 21 results
-
For Sale - DSD wheel adapter for Thrustmaster T500RS
pawelmilner posted a topic in Sim Gear - Buy and Sell
Derek Speare adapter to fit aftermarket real car steering wheels to your T500RS. retails for $50 selling for $39 email me at [email protected] -
I collected a couple of these in anticipation of going the OSW route, but they are now surplus to requirements.They normally cost €25 + €17 shipping = €42 (plus currency conversion) from Fanatec.I'll sell them for £20 each including shipping. PayPal F&F Gift payment to avoid fees.Have one, have both, have neither. The choice is yours! Stock photo: Fanatec product page:https://www.fanatec.com/eu-en/sim-racing-hardware-accessories/clubsport-usb-adapter-eu.htmlClubSport USB AdapterModel: CS USBSeries: ClubSportPCFull compatibilityConnect your Fanatec devices via USB to your PC to make it compatible to almost any modern racing simulation.ClubSport ShifterUse Fanatec peripherals like your ClubSport Shifter (CSS or CSS SQ) with your Logitech G27 or Thrustmaster T500RS or any other wheel on PC.ClubSport HandbrakeThe ClubSport Handbrake requires connection to a Fanatec product with dedicated handbrake port by default. With this adapter you can use it as standalone device on PC.Features Use your ClubSport Shifter with any racing wheel on PC (supports sequential and h-pattern mode) Operate the ClubSport Handbrake without another Fanatec product with handbrake port add USB functionality to analog Fanatec Pedals Upgradable firmware Enables 7th gear on all wheels (not only if connected to CSW) CompatibilityControllers: ClubSport Shifter ClubSport Shifter SQ ClubSport Handbrake CSL Elite Pedals (analog pedals without CSL Elite Pedals Loadcell Kit) Games: Most PC racing games which support multiple input devices. Example: Assetto Corsa,iRacing, rFactor2, Project CARS and many more! Special Notes If operated with the ClubSport Handbrake or analog pedals, the device needs to be updated with a different firmware. Therefore, please enter the driver menu, navigate to the update tab, click on "Update USB Adapter Firmware", select your mode and hit "start update". To calibrate the shifter you need to run the calibration program in the driver on PC Don't eat yellow snow (just checking to see if anyone has read this far) What's included USB Adapter My eternal thanks
-
Thrustmaster TMX/T150(rs) aftermarket custom steering wheel adapter
KSsim posted a topic in Sim Gear - Buy and Sell
Hi, We are selling adapters for custom aftermarket steering wheels for Thrustmaster TMX/T150(rs) TMX, Pre-sale discount, adapter for 43USD T150(rs), Pre-sale discount, kit for 50USD High quality PLA adapter, smooth, well strong - 100% infill (solid plastic, not hollow as others sell) It fits to standard 70mm wheels(Sparco, Momo......) Many colors available If you want other color e.g. white... just text me.. In package included : 1x Steering wheel adapter 6x mounted M5 nuts 6X mounted M5 imbus (Allen, HEX) bolts 1x Custom board for T150(rs) (without custom board, T150(rs) will not calibrate properly) For installation the adapter and custom aftermarket rim you do not need any special tools. Screws, which holds the adapter on it's place are reused from stock rim. Pictures with TMX will be taken soon. If you broken the adapter and send pictures, return would be accepted ! Links : Mounting the adapter - YouTube tutorial Thrustmaster T150(rs) listing Thrustmaster TMX listing ! Please note ! ADVANTAGES - Buy 3 adapters and get 1 as gift - Buy 5 adapters and get 2 as gift (In case you want to buy more (e.g. 2 and more) please text me via Ebay or email and then we could agree the final price with discounts) Shipping WORLDWIDE from Czech Republic, priority with tracking number : -- Europe priority shipping 8USD -- America priority shipping 8USD If you have any questions, PM me.. -
Brand New In box. Save over buying direct. Must Include ISRTV in your offer! This allows me to know that you used this link, which equates to me having lower fees from eBay, which translates to me being able to be more "Negotiable" on your offer. Thank you. http://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_ff3=2&pub=5575378759&campid=5338273189&customid=&icep_item=153038102912&ipn=psmain&icep_vectorid=229466&kwid=902099&mtid=824&kw=lg&toolid=11111 Features Use your ClubSport Shifter with any racing wheel on PC (supports sequential and h-pattern mode) Operate the ClubSport Handbrake without another Fanatec product with handbrake port add USB functionality to analog Fanatec Pedals Upgradable firmware Enables 7th gear on all wheels (not only if connected to CSW) Compatibility Controllers: ClubSport Shifter ClubSport Shifter SQ ClubSport Handbrake CSL Elite Pedals (analog pedals without CSL Elite Pedals Loadcell Kit) Games: Most PC racing games which support multiple input devices. Example: Assetto Corsa,iRacing, rFactor2, Project CARS and many more! Special Notes If operated with the ClubSport Handbrake or analog pedals, the device needs to be updated with a different firmware. Therefore, please enter the driver menu, navigate to the update tab, click on "Update USB Adapter Firmware", select your mode and hit "start update". To calibrate the shifter you need to run the calibration program in the driver on PC Packaging Details Size (L x W x H) : 22.00cm x 15.50cm x 2.00cm Weight: 0.10kg Volume weight: 0.14kg What's included USB Adapter
-
I have been looking for a CPX adapter, v1 or v2, so I can pick up a set of Fanatec clubsport v2’s to hook up to my t300 wheelbase. No way I’m patient enough to wait for the CPX v3 to debut, especially with no timeframe known for the release. If you have a CPX adapter that you’d be willing to part with, please message me. Thanks
-
Hi I am based in Europe and want to upgrade from my T3PA pedals to either CSL LC or CSL v3 but I want to run them with my T-GT on console. Basherboards isn’t selling them at the moment (working on new version with no release date). So anyone have one he is not using?
-
Hi I could really do with someone’s help. today I received my fanatec handbrake and USB adapter. I’ve done all the things it requested me todo to set it up, all the firmware is up to date. however it doesn’t seem to be working, the function test don’t work but it’s been regonised in assetto corsa, it just asks for input but how to I set it please help me please
-
Hey guys new here but just ordered a 150 pro and im looking to pair it with the shifter. I am looking for an adapter to connect a logitech shifter to my computer to make it a standalone device or a good price on the th8a shifter. If anyone out there has one let me know! Thanks!!
-
Hello, I have been looking to buy a Basherboards CPX Adapter to connect my Clubsport V1 pedals to my T300 base. Please let me know if you have one that you wouldn't mind selling Thank you!
-
Basherboards CPX adapter fore sale ** SOLD **
Johnny Mowdown posted a topic in Sim Gear - Buy and Sell
Selling my Basherboards CPX adapter it is in perfect working condition. SOLD shipped (lower 48 only) PayPal friends and family (No fees) Thanks Shawn Watson! -
(SOLD for all of it) Selling a TH8RS that has served me well. Have bought a fanatec CSS since however. So thats why im selling this. asking $100 + Shipping Also have an adapter for it that screws in to let you attach a regualr shift knob. (I used to attach my FRS, and WRX stock shift knobs M12x1.25) Also another adapter that i tottaly forgot how i used it for. I think it was used to attach a M12x1.125 knob for a lower height on the TH8RS. Basherboards made these for me a long whiles back Both for $10+ shipping Located in NYC
-
For Sale XCM MaxRace F1 V4 Adapter to convert g27 wheel to xbox one 40 Euros shipping not included from Spain
-
pls pm me
-
I have a Leo Bodnar Pedal cable for sale. I sold my sim racing equipment and still have this adapter left over. $25 Shipped See description below. Turn your DFP, G25, G27, G29 or G920 pedals into a stand alone device and increases sensitivity to 10-bit (1024 steps) for greater precision! 10-bit resolution on all pedal axes Highly accurate, smooth and stable position measurement. 250 updates per second Reliable, rock-steady calibration settings Windows calibration settings will not be lost after unplugging or swapping USB connectors Completely standalone solution Use Logitech® G25, G27, G29, G920, Driving Force™ GT, Driving Force™ Pro or pedals on their own or with another wheel. OR Use your DIY pedals using potentiometers or Hall sensors - Click here for connector pin out Automatic recognition of connected pedal types Logitech G25, G27*, G29*, G920*, Driving Force GT**, Driving Force Pro, or generic pedals with up to 3 axes. * G27, G29 and G920 pedals are identical to G25 and will be shown as such. ** Driving Force GT pedals are identical to Driving Force Pro and will be shown as such Natively supported by Windows 10/8/7, Vista 32, Vista 64, XP, 2000, Me, 98, Mac OS X and Linux. NOT SUITABLE FOR PLAYSTATION OR XBOX
-
New BLACK or ORANGE Thrustmaster T300/TX/T500/TS-PC steering wheel adapter. HERE ORANGE HERE BLACK High quality PLA adapter, smooth, well strong, 100%infill. It fits to standard 70mm wheels(Sparco, Momo......) Many colors available. If you want other color etc. white... write me.. Package included : 1x Steering wheel adapter 6x mounted M5 nuts 6X mounted M5 screws ! Please note ! Shipping WORLDWIDE from Czech Republic, priority with tracking number : --Europe priority shipping 6USD --America priority shipping 6USD If you have any questions write me.. :--) Thanks KSS
-
Thrustmaster T300/TX/T500/TS-PC steering wheel adapter
KSsim posted a topic in Sim Gear - Buy and Sell
New BLACK or ORANGE Thrustmaster T300/TX/T500/TS-PC steering wheel adapter. HERE ORANGE HERE BLACK High quality PLA adapter, smooth, well strong, 100%infill. It fits to standard 70mm wheels(Sparco, Momo......) Many colors available. If you want other color etc. white... write me.. Package included : 1x Steering wheel adapter 6x mounted M5 nuts 6X mounted M5 screws ! Please note ! Shipping WORLDWIDE from Czech Republic, priority with tracking number : --Europe priority shipping 6USD --America priority shipping 6USD If you have any questions write me.. :--) Thanks KSS -
Please PM me if you have one. Thank you Sebj
-
I have a Leo Bodnar Pedal cable for sale. I sold my sim racing equipment and still have this adapter left over. $25 Shipped See description below. Turn your DFP, G25, G27, G29 or G920 pedals into a stand alone device and increases sensitivity to 10-bit (1024 steps) for greater precision! 10-bit resolution on all pedal axes Highly accurate, smooth and stable position measurement. 250 updates per second Reliable, rock-steady calibration settings Windows calibration settings will not be lost after unplugging or swapping USB connectors Completely standalone solution Use Logitech® G25, G27, G29, G920, Driving Force™ GT, Driving Force™ Pro or pedals on their own or with another wheel. OR Use your DIY pedals using potentiometers or Hall sensors - Click here for connector pin out Automatic recognition of connected pedal types Logitech G25, G27*, G29*, G920*, Driving Force GT**, Driving Force Pro, or generic pedals with up to 3 axes. * G27, G29 and G920 pedals are identical to G25 and will be shown as such. ** Driving Force GT pedals are identical to Driving Force Pro and will be shown as such Natively supported by Windows 10/8/7, Vista 32, Vista 64, XP, 2000, Me, 98, Mac OS X and Linux. NOT SUITABLE FOR PLAYSTATION OR XBOX
-
Fanatec CSR mod - universal quick release race wheels with buttons
AJ Allen posted a topic in Fanatec Modifications
Fanatec CSR “A2” mod I have a CSR wheel and I am more than satisfied with its feedback strength. The downside is I totally hate the “toy” wheel thats attached. I needed automotive grade, quick-change race wheels with buttons plates With a few pieces from ebay and the local Radio Shack (and weeks of trial and error) I was able to come up with a simple and very inexpensive way to make a quick change wheel solution for my CSR wheel. I made sure to get those controls out of the wheel and onto somewhere accessible while keeping it looking somewhat presentable. I took a piece of ABS and duplicated the mount plate from the wheel then screwed it to the board and used a 10-conductor cable to connect it up back to the base. For the wheel mount I used automotive grade quick release adapters from ebay and the CSR wheel adapter from SRH. With the neck of the CSR being open I was able to fit a 20-pin ATX power adapter and wiring harness through it, and connect it to the DSD button matrix board using the arduino pins. This lets me use 10 buttons per wheel in any configuration and the wiring for doing this is super easy with buttons only using 2 conductors each (top/bottom row = button conductor 1&2 x 10 rows across = 20 pins) and I still have 22 buttons to make another button box from on the DSD matrix. Using #10/32 3” screws from home depot (same thread as steering hubs) I was able to space out just enough room for the male ATX connector on the base sandwiched between the DSD & quick release and the same goes for the wheel side using the female ATX connector about 1-1.5” and just cut off the excess. the stiffness of the atx connector wire, which I though would be an issue at first turned out to work in my favor. It allows the wheel to connect without needing any fingers or messing around in between the mount and it links and unlinks better than I EVER could planned for. The result is now I can turn any wheel i want into a auto grade race wheel for only a few pieces of wires, switches and screws. I cut the wheel plate from a piece of ABS plastic using a Dremel and covered it in some carbon fiber vinyl. The total materials to do this is around only $25 per wheel, maybe less. (plus DSD’s / SRH fees of $60 for the adapter and USB button matrix) I’ve already put 100 laps on it, its SUPER solid and I love the options of wheels I have now for this CSR. I can close the case back up but the fan really gets to buzzing during the long races so i’ll leave it open and see if that helps keep her cool. I have 4 wheels and also a SRW-S1 formula wheel on it that I modded! I’ll have to make a post on that later. Questions, comments, concerns? I'm all ears. Thanks for reading. -
Any T3PA (or pro) Pedal USB Adapter besides Bodinhausen+Bodnar combo ?
BK_NC posted a topic in Thrustmaster Modifications
Anyone know of any other ways to make the T3PA (or Pro) a standalone USB set other than the Bodinhausen T500RS Pedal Adapter + Bodnar USB Cable combination? I have a perfectly good DFGT and don't really need a new wheel but the pedals are crap. The T3PA and the 2 adapters put it close to the price of the CSL Elite Load Cell pedals from Fanatec as far as price goes. Figure might as well go with the later if there isn't a cheaper USB alternative for the T3PA. -
I want to make an adapter for my TX wheel , just like the GTE adapter , to attach an aftermarket wheel . (something like in the picture) So if anyone who can help me with some dimensions to make a template (or have a template already done): - adapter thickness , diameter - the diameter between the 3 holes for the wheel plate and bolt sizes - the diameter between the 3 holes for the aftermarket wheel is 70 mm i understand , what bolts are used ?
