Search the Community
Showing results for tags 'PS3'.
Found 2 results
Seth Francis posted a topic in Thrustmaster ModificationsHello fellow sim racers! Today I have decided to start a thread about a project I recently completed as I believe some Thrustmaster wheel owners may be interested. This is a button plate for the T500 wheel base that uses an Arduino board and sketch to emulate the original T500 GT rim. This means the button plate is recognized by the T500 base as the original rim, so console compatibility is maintained. There is also no need for an external USB as the Arduino is powered by the wheelbase. I was turned on to this project when I came across a blog/tutorial written by Taras from rr-m.org. Taras built a similar console compatible button plate using an Arduino board for the TX wheelbase. He has now also added a blog post for the T500 rim emulation since we where able to confirm that we in fact have a working sketch. Taras should be given full credit for all of the software, sketch writing and wiring diagrams for both the TX and T500 emulations. This was my first time using Arduino so his knowledge was definitely needed for my project to be a success. In his blogs (linked below) you will find all of the necessary information to perform this project yourself, including the Arduino Sketches and wiring diagrams. I have included some pics of my button plate project as well as the YouTube video I upload showing my button plate working on both PS3 and in the control panel. Hopefully Taras will be joining isrtv and posting here about his TX project as well. The button plate I have made now is a very simple and plain design using an Arduino Uno R3, once I replace the 350mm rim with a suede 320mm rim I will make a much nicer button plate using an Arduino Nano. I hope you guys enjoy and please feel free to ask any questions or post any comments you may have, I always like to get feedback Edit: The TX emulation sketch is now confirmed to function with the T300 base. This sketch can be found and downloaded from Taras' blog part 3 in the link below. Link to Taras' Thrustmaster TX (and T300) Arduino Powered Button Plate Blog Post/Tutorial (Sketches, wiring diagrams and videos for TX within) Pt. 1: http://rr-m.org/blog/hacking-a-thrustmaster-tx-rw-gaming-wheel-with-arduino-uno-part-1/ Pt. 2: http://rr-m.org/blog/hacking-a-thrustmaster-tx-rw-wheelbase-with-arduino-uno-part-2/ Pt. 3: http://rr-m.org/blog/arduino-nano-controlled-buttons-for-thrustmaster-wheelbases-part-3/ Link to Taras' T500 GT rim emulation wiring diagram and Arduino Sketch: http://rr-m.org/blog/emulating-thrustmaster-t500-gt-wheel-electronics-with-arduino/ My YouTube Video: https://youtu.be/2-THDfbPM-A Photos of my project: Thanks for looking and as always, "Keep Driving!"
Jason187781 posted a topic in Sim Racing Rigs / CockpitHi All, I have been under the radar now for months busy beavering away on a Motion simulator that works with Next Gen consoles and PC. Well I am over the moon to be able to say I have done it! I am now putting myself out there for the world to see and answer as many questions as I can with a view to making these available as soon as possible. I'm not interested in being the next bill gates, rather I want to build and sell these as my day job and make it possible for everyone to enjoy one. This is my ( in progress ) website: http://www.caniseng.com/ And my all important Indygogo for funding setup: https://www.indiegogo.com/projects/motion-simulator-for-next-generation-consoles/x/13814348#/ Thanks again Jason