Search the Community

Hello everyone, I just wanted to present my T300RS wheel modification I just finished, if it can help someone or just give ideas for your own project. I used a GT2i 34cm wheel: ( https://www.amazon.fr/gp/product/B00TFAICUG/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 ), some switches ( https://www.amazon.fr/gp/product/B074XDQL7Y/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1 ), made some parts with Tinkercad then "3dprinted" them (switches supports, paddles fixations, wheel adapter) and also used some threaded rod with lock nuts. None of the original parts were altered or modified excepted solders I made on the board. No keys were lost: I kept SE an ST original keys, but linked all missing ones to my new switches. Yellow: 3 and 4, Red: 5 and 6. Blue: L2 R2. Center: up down left right and the most important !!!!! the Green for the horn !!!! (PS key ). Paddles are still on 1 and 2.

Hello, I have a fanatec CSR wheel, along with pedals and shifter. I also have a diy hydraulic handbrake, that I modded to the wheel. It isn't exactly hydraulic, just uses an on/off switch to engage the e brake. Anyways.... Since I have been back to sim racing, I have finally come to the conclusion that the CSR wheel is literally built for a child. It's a great wheel setup, but the wheel is an oversized Nintendo wii wheel , lol. I have found the wheel that I would like to use. For those that are curious, it's just a basic 320mm deep dish wheel from eBay. Who cares, I'm just here to to play and enjoy the thing. Now for the kicker, I need a wheel adapter ( http://simracinghardware.com/product/fanatec-wheel-adapter/ ) in order to mount a 70mm wheel to it. And this being a budget build, and me being anxious, I would rather not wait until this shipped from the across the pond. So, has anybody 3D printed off a wheel adapter for the CSR? I know it's an old wheel, but I've seen plenty of 3D printed adapters for G/27 wheels. Any and all help will be appreciated.

Hello, I have a fanatec CSR wheel, along with pedals and shifter. I also have a diy hydraulic handbrake, that I modded to the wheel. It isn't exactly hydraulic, just uses an on/off switch to engage the e brake. Anyways.... Since I have been back to sim racing, I have finally come to the conclusion that the CSR wheel is literally built for a child. It's a great wheel setup, but the wheel is an oversized Nintendo wii wheel , lol. I have found the wheel that I would like to use. For those that are curious, it's just a basic 320mm deep dish wheel from eBay. Who cares, I'm just here to to play and enjoy the thing. Now for the kicker, I need a wheel adapter ( http://simracinghardware.com/product/fanatec-wheel-adapter/ ) in order to mount a 70mm wheel to it. And this being a budget build, and me being anxious, I would rather not wait until this shipped from the across the pond. So, has anybody 3D printed off a wheel adapter for the CSR? I know it's an old wheel, but I've seen plenty of 3D printed adapters for G/27 wheels. Any and all help will be appreciated.