Search the Community
Showing results for tags 'button plate'.
Found 3 results
Cody Hayley posted a topic in Thrustmaster ModificationsHey everyone, Figured I'd share my latest button plate project that I'm currently working on for my T300 base. I based the design off the steering wheel used in the Bentley GT3 racecar using a top mounted button plate rather than having the plate behind the wheel. I previously made a behind wheel mounted button plate a while back and wanted to go for a different design. After a few hours of drafting on AutoCAD I came up with a plate design and button placement I was satisfied with. I cut a prototype plate from some foam board I had lying around to see how it looked with the buttons. Pretty good if I do say so my self For this project I am using the TM compatible circuit by Moogen which can be found here: The circuit allows for both console and PC compatibly while maintaining the TM quick-release connection and includes inputs for 13 buttons, 4 d-pad inputs and 2 paddle shifters. I was amazed at how small and compact the circuit board is, making it perfect for button plate projects. I used push buttons for all 13 inputs and 2 toggle switches for the d-pad with the left switch being UP and DOWN and the right switch being LEFT and RIGHT directions. The wheel I am using is a 320mm NRG suede. To keep the plate raised off the steering wheel I'm using 1/2" plastic spacers which gives tons of space beneath the plate for the circuit board and all the wiring. Because of the placement of the DIN connector on the circuit I'll have to leave 1 screw out when bolting the wheel to the DSD adapter. For the paddles I tried mounting them to a backing plate using hinges and springs. With the push button I'm using and the tension of the spring the paddles have a nice firm and tactile feel comparable to my 599XX rim even using the foam board prototype. I wired up all the buttons and switches and checked each input using the TM profiler to make sure it was working before using shrink tubing to tidy everything up. The next step is to cut and drill the button plate, paddle shifters and the shifter mounting plate. I plan on using 4mm polycarbonate sheet for the plate and paddles and covering it with carbon fibre vinyl wrap. Once this is done and the DSD adapter arrives everything will be ready to be assembled! I'll post an update when the project is finished. - Cody
Seth Francis posted a topic in Thrustmaster ModificationsHello fellow sim racers! Today I have decided to start a thread about a project I recently completed as I believe some Thrustmaster wheel owners may be interested. This is a button plate for the T500 wheel base that uses an Arduino board and sketch to emulate the original T500 GT rim. This means the button plate is recognized by the T500 base as the original rim, so console compatibility is maintained. There is also no need for an external USB as the Arduino is powered by the wheelbase. I was turned on to this project when I came across a blog/tutorial written by Taras from rr-m.org. Taras built a similar console compatible button plate using an Arduino board for the TX wheelbase. He has now also added a blog post for the T500 rim emulation since we where able to confirm that we in fact have a working sketch. Taras should be given full credit for all of the software, sketch writing and wiring diagrams for both the TX and T500 emulations. This was my first time using Arduino so his knowledge was definitely needed for my project to be a success. In his blogs (linked below) you will find all of the necessary information to perform this project yourself, including the Arduino Sketches and wiring diagrams. I have included some pics of my button plate project as well as the YouTube video I upload showing my button plate working on both PS3 and in the control panel. Hopefully Taras will be joining isrtv and posting here about his TX project as well. The button plate I have made now is a very simple and plain design using an Arduino Uno R3, once I replace the 350mm rim with a suede 320mm rim I will make a much nicer button plate using an Arduino Nano. I hope you guys enjoy and please feel free to ask any questions or post any comments you may have, I always like to get feedback Edit: The TX emulation sketch is now confirmed to function with the T300 base. This sketch can be found and downloaded from Taras' blog part 3 in the link below. Link to Taras' Thrustmaster TX (and T300) Arduino Powered Button Plate Blog Post/Tutorial (Sketches, wiring diagrams and videos for TX within) Pt. 1: http://rr-m.org/blog/hacking-a-thrustmaster-tx-rw-gaming-wheel-with-arduino-uno-part-1/ Pt. 2: http://rr-m.org/blog/hacking-a-thrustmaster-tx-rw-wheelbase-with-arduino-uno-part-2/ Pt. 3: http://rr-m.org/blog/arduino-nano-controlled-buttons-for-thrustmaster-wheelbases-part-3/ Link to Taras' T500 GT rim emulation wiring diagram and Arduino Sketch: http://rr-m.org/blog/emulating-thrustmaster-t500-gt-wheel-electronics-with-arduino/ My YouTube Video: https://youtu.be/2-THDfbPM-A Photos of my project: Thanks for looking and as always, "Keep Driving!"