-
Upcoming Events
No upcoming events found
37 topics in this forum
-
- 151 replies
- 45510 views
-
- 0 replies
- 1171 views
-
- 4 replies
- 3447 views
-
- 50 replies
- 7941 views
-
- 5 replies
- 3284 views
-
- 41 replies
- 9209 views
-
- 64 replies
- 9882 views
-
- 14 replies
- 5438 views
-
- 42 replies
- 7620 views
-
- 17 replies
- 5239 views
-
- 3 replies
- 1858 views
-
- 0 replies
- 1581 views
-
- 0 replies
- 1274 views
-
- 6 replies
- 3801 views
-
- 28 replies
- 9477 views
-
- 15 replies
- 9922 views
-
- 8 replies
- 2975 views
-
- 4 replies
- 1946 views
-
- 63 replies
- 7973 views
-
- 4 replies
- 2846 views
-
- 2 replies
- 1410 views
-
- 27 replies
- 4913 views
-
- 49 replies
- 7955 views
-
- 50 replies
- 6519 views
-
- 0 replies
- 1212 views
Announcements
-
Posts
-
-
-
I pmed you with my email. i ll send via email those pics. I cant post pics as my account need cleanup of old posts ... -
By Tillmander · Posted
Can I see pics of the pedals, please? -
1 Ground the rig . Create a wired connection to a diy plug. Plug it to a grounded socked on your wall. Make sure your electrical socket on the Wall is actually grounded properly. do that check with a voltmeter (sometimes that s not the case if done by a lousy jobber) 2 Ground the DD wheel , especially the motor with a wire to the rig or to a wall socket 3 ground each device , to avoid flickering etc that should be enough. PS the Dennis Reimer usb mod is ok as long as your rig is also properly grounded . what it does is make a connection between the shield and GND of the device to the GND of the rig that is also grounded. in a nutshell everything should be connected to the electrical wall socket GND one way or another...
-
-
Topics
-
-
Popular Contributors
-
Who's Online (See full list)
-
Member Statistics
-
Recently Browsing
No registered users viewing this page.
